Implementation of an AlGaN-based solar-blind UV four-quadrant detector
نویسندگان
چکیده
منابع مشابه
High-speed solar-blind AlGaN-based metal–semiconductor–metal photodetectors
Solar-blind AlGaN metal–semiconductor–metal (MSM) photodetectors with fast pulse response have been demonstrated. The devices were fabricated on MOCVD-grown epitaxial Al0.38Ga0.62N layers, using a microwave compatible fabrication process. The photodiode samples exhibited low leakage with dark current densities below 1 × 10 A/cm at 40 V reverse bias. Photoconductive gain-assisted photoresponse w...
متن کاملHigh-Performance Solar-Blind AlGaN Schottky Photodiodes
High-performance solar-blind AlGaN-based Schottky photodiodes have been demonstrated. The detectors were fabricated on MOCVD-grown AlGaN/GaN hetero-structures using a microwavecompatible fabrication process. Current-voltage, spectral responsivity, noise, and high-speed characteristics of the detectors were measured and analyzed. Dark currents lower than 1 pA at bias voltages as high as 30 V wer...
متن کاملAbsorption Corrections for a Four-Quadrant SuperX EDS Detector
Consider a four-quadrant detector consisting of four circular active regions of area Aq each, placed symmetrically around the sample, as shown schematically in Fig. 1(a). The sample holder is inserted from the right, and the quadrants are 90° apart, oriented symmetrically at ±45° with respect to the primary tilt axis. The specimen tilt angles are labeled and β, with positive angles correspond...
متن کاملSolar-blind UV detectors based on wide band gap semiconductors
Solid-state photon detectors based on semiconductors other than silicon are not yet considered mature technology but their current development opens new possibilities, also for space observations. Such devices are especially attractive for ultraviolet radiation detection, as semiconductor materials with band gaps larger than that of silicon can be produced and used as “visible-blind” or “solar-...
متن کاملdevelopment and implementation of an optimized control strategy for induction machine in an electric vehicle
in the area of automotive engineering there is a tendency to more electrification of power train. in this work control of an induction machine for the application of electric vehicle is investigated. through the changing operating point of the machine, adapting the rotor magnetization current seems to be useful to increase the machines efficiency. in the literature there are many approaches wh...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Physica B: Condensed Matter
سال: 2014
ISSN: 0921-4526
DOI: 10.1016/j.physb.2013.10.063