Implementation of Step Motor Control under Embedded Linux Based on S3C2440
نویسندگان
چکیده
منابع مشابه
Design and Implementation of Embedded Media Player Based on S3c2440
This project proposes a method of understanding and implementing a light weighted media player using SDL based FFMPEG media player library on a SOC based board running on ARM9 hardware with LINUX as the target OS i.e., S3C2440 (also called as mini 2440) as core processor and select 1GB NandFlash as external memory. At the same time SD and USB interface are used for extending the storage. The mo...
متن کاملImplementation of a Novel Brushless DC Motor Drive based on One-Cycle Control Strategy
In this paper, one-cycle control (OCC), as a constant-frequency PWM control strategy for current control of a six-switch brushless dc (BLDC) motor drive is investigated. Developed current regulator is a unified controller and PWM modulator. Employing the one-cycle control strategy, decreases the torque ripple resulted from the conventional hysteresis current controllers and therefore, the vibra...
متن کاملBenchmarking Real-Time Linux Implementation on Embedded Platform
This paperdeals with design, implementation and testing of real time drivers for I2C and UART processor controllers on Beaglebone Black. Embedded Board runs with Linux 3.8.13 and real time co-kernel, Xenomai-2.6.3. Beaglebone Black has cortex A8 processor with 1GHz frequency. Xenomai Real time driver Model(RTDM) drivers are made for I2C and UART processor controller and their performance parame...
متن کاملEmbedded Linux implementation on a commercial digital TV system
A Digital TV system is necessary for not only video and audio, but also data processing. Especially in the case of bidirectional broadcasting, it should manage the return channel created by the Internet, PSTN, and so on. Because of many functionalities and multitasking jobs, it needs an Operating System. Embedded Linux, as open source program can increase cost effectiveness in the market and ha...
متن کاملDSP-Based Field-Oriented Step Motor Control
The SMC3 motor drive has been built using an Analog Devices ADSP-2101 digital signal processor (DSP). The SMC3 is designed to work with two-phase step motors, which are permanent magnet motors with many (typically 100) poles. The firmware in the SMC3 DSP drives the step motor phase windings using field-oriented control rather than using single steps. This method derives the maximum theoretical ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2012
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2012.01.241