Improved resonance method for fatigue test of full-scale wind turbine blades
نویسندگان
چکیده
To further reduce the power of exciter in common fatigue testing methods and increase frequency to decrease time, this paper proposes an improved method—Tug Fatigue Testing system (TFTs). The advantages new method are low high its due no with moving masses attached blade. In TFTs, exciters mounted on ground or fixed bracket can be used excite blade uniaxial biaxial test. paper, mechanical model TFTs is established compare motor required by inertial shear load blades both ways. Furthermore, a test 56.5 m will performed verify feasibility method. addition, bending moment distribution 80 excited was measured compared same resonance excitation evaluate effect. results prove that needs lower exciter, produces smaller loads, provides higher flap-wise direction than excitation. Biaxial tests also conducted
منابع مشابه
A Full-Scale Fatigue Test of 9-m CX-100 Wind Turbine Blades
This paper presents the SHM result of a 9m CX-100 wind turbine blade under fullscale fatigue loads. The test was performed at the National Renewable Energy Laboratory. The 9-meter blade was instrumented with piezoelectric transducers, accelerometers, acoustic emission sensors, and foil strain gauges on the surface of the blade. The blade underwent fatigue excitation at 1.8 Hz for defined interv...
متن کاملAtmospheric Full Scale Testing of a Morphing Trailing Edge Flap System for Wind Turbine Blades
A novel Active Flap System (AFS) has been developed at DTU Wind Energy, as a result of a 3-year R&D project following almost 10 years of innovative research in this field. The full scale AFS comprises an active deformable trailing edge has been tested at the unique rotating test facility at the Risø Campus of DTU Wind Energy in Denmark. The design and instrumentation of the wing section and the...
متن کاملA General Method for Fatigue Analysis of Vertical Axis Wind Turbine Blades*
The fatigue life of wind turbine blades that are exposed to the random loading environment of atmospheric winds is described with random data analysis procedures. The incident wind speed and the stresses caused by these winds are expressed in terms of probability density functions, while the fatigue life vs stress level relationship is treated deterministically. This approach uses a "damage den...
متن کاملInnovative design procedures for large-scale wind turbine blades
cost-effective, lightweight, large-scale wind turbine blades. Material costs are continuously changing, and the use of glass fibres (E-, Sand R-glass) and carbon fibre should be explored considering density/cost, specific stiffness and strength. The various fibre angles should also be used to best meet the design requirements. Rather than just a straight blade, various blade geometries should b...
متن کاملA Novel Multi-Point Excitation Fatigue Testing Method for Wind Turbine Rotor Blades
Abstract: Wind turbine blades have to withstand the rigorous test of 20–25 years of service. Fatigue testing is an accurate method used to verify blade reliability. Multi-point excitation could better fit the fatigue damage distribution, which reduces the power output of a single exciter and saves testing energy consumption. The amplitude, phase, and frequency characteristics of the fatigue tes...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: AIP Advances
سال: 2022
ISSN: ['2158-3226']
DOI: https://doi.org/10.1063/5.0095283