Improvement of Injection Moulding Processes by Using Dual Energy Signatures

Injection moulding antireflective nanostructures

Simulation Tools for Injection Moulding

In this paper the concern is certain simulation tools for the lling phase of injection moulding of plastics. A mathematical model, called the distance model, of the injection moulding process has been developed by Professor Gunnar Aronsson at the University of Linkk oping. From this model one can nd the lling pattern (i.e. ow fronts) of the molten polymer as it enters the mould, by solving a sh...

Injection moulding temperature and powder loading influence to the metal injection moulding (MIM) green compact

1 UTM Razak School of Engineering and Advanced Technology, Universiti Teknologi Malaysia, International Campus, 54100 Kuala Lumpur, Malaysia. 2 Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia. 3 Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia. 4 Faculty of Me...

Injection Moulding of Solid Oral Dosage Forms

Oral solid dosage forms are the most patient-accepted and therefore industrially relevant pharmaceutical applications, representing 80% of the market share. In that context, polymer processing techniques, such as hot melt extrusion (HME) or injection molding (IM), are increasingly used to process primary material into the final dosage forms due to several benefits (e.g., enhanced solubility or ...

A Model of the Injection Moulding Process

This paper is concerned with the injection moulding process, in which hot molten plastic is injected under high pressure into a thin cold mould. Assuming that the velocity and temperature profiles across the mould maintain their shape, a simple steady state model to describe the behaviour of a Newtonian fluid during the rilling stage is developed. Various phenomena of the process are examined, ...