Improvement of the pulsed wire method for undulator magnetic-field measurement
نویسندگان
چکیده
منابع مشابه
Pulsed Wire Magnetic Field Measurements on Undulator U10p
T.C. Fan*, F.Y. Lin, C.S. Hwang, Ian C. Hsu Synchrotron Radiation Research Center, Hsinchu, Taiwan National Tsing Hua University, Hsinchu, Taiwan Abstract Several laboratories have used the pulsed wire method for magnetic field measurement. The acoustic wave distortion of the wire was observed. The limitations of this method were discussed. A pulsed wire system is under test in SRRC on an undul...
متن کاملPulsed-wire Method of Field Measurement on Short Elliptically Polarlized Undulator
With two sets of photo couplers, scientists already have applied pulsed-wire method (PWM) to measure the magnetic field along two mutually perpendicular directions. The authors believe that two-dimensional pulsed-wire method is useful for the test of elliptically polarizing undulator (EPU). We tried to use this method to observe the first integral and second integral fields of a short EPU in re...
متن کاملMeasurement Method of Magnetic Field for the Wire Suspended Micro-Pendulum Accelerometer
Force producer is one of the core components of a Wire Suspended Micro-Pendulum Accelerometer; and the stability of permanent magnet in the force producer determines the consistency of the acceleration sensor's scale factor. For an assembled accelerometer; direct measurement of magnetic field strength is not a feasible option; as the magnetometer probe cannot be laid inside the micro-space of t...
متن کاملThe Study of Improvement of Dispersive Soil Using Magnetic Field
In this study, the feasibility of using magnetic technology to reduce the dispersion of soil has been investigated. The reference treatment was potable water and 3 magnetic water devices (with different magnetic intensities) were used for magnetizing the potable water. The results showed that the magnetic field has a significant effect in order of 5 percent on increasing of magnesium concentrat...
متن کاملMeasurement and simulation of magnetic field strenght in the nano magnetic abrasive finishing process
Magnetic abrasive finishing can be classified as a non-traditional super finishing method for finishing surfaces with different shapes and working materials like flat plates, shafts, bearings parts, screws, tubes and many other mechanical parts that need good surface finishing properties. MAF is effective in polishing, cleaning, deburring and burnishing metal parts. The most important parameter...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Review of Scientific Instruments
سال: 2002
ISSN: 0034-6748,1089-7623
DOI: 10.1063/1.1420755