Improving endmilling surface finish by workpiece rotation and adaptive toolpath spacing
نویسندگان
چکیده
منابع مشابه
Surface Finish
Q.1. What factors govern the selection of a particular cleaning process for metallic surfaces Ans. Selection of cleaning process is mainly influenced by (a) Type of contaminants (b) Degree of cleanliness required (c) Composition of metal (d) Condition of metal (e) Thickness of rust and scale (f) Allowable metal loss (g) Surface finish tolerances (h) Shape and size of workpieces (i) Production r...
متن کاملTesting a rotation axis to drain a 3D workpiece
Given a triangular mesh defining the geometry of a 3D workpiece filled with water, we propose an algorithm to test whether, for an arbitrary given axis, the workpiece will be completely drained under gravity when the rotation axis is set parallel to the ground and the workpiece is rotated around the axis. Observing that all water traps contain a concave vertex, we solve our problem by construct...
متن کاملOptical Effect of Surface Finish by Single Point Diamond Machining
Although ultraprecision diamond turned optics can have surface roughness down to tens of nanometers or even lower, they may still contain defects due to machining process variations. Diamond turned surfaces have been carefully studied before [3-12]. The previous research however was mainly focused on the causes of the surface texture and one of the main goals of these studies was to improve the...
متن کاملEffects of cutting edge geometry, workpiece hardness, feed rate and cutting speed on surface roughness and forces in finish turning of hardened AISI H13 steel
In this study, the effects of cutting edge geometry, workpiece hardness, feed rate and cutting speed on surface roughness and resultant forces in the finish hard turning of AISI H13 steel were experimentally investigated. Cubic boron nitrite inserts with two distinct edge preparations and throughhardened AISI H13 steel bars were used. Four-factor (hardness, edge geometry, feed rate and cutting ...
متن کاملSurface Finish in Micro-drilling of Ptfe
Surface finish of engineering components plays a key role in their functionality, particularly where the size of the geometric features of the component decreases. This paper reports on such an application – the drilling of micro-holes in PTFE during manufacture of molds for use in the bio-medical field. These molds are used for production of silicone scaffolds requiring very large aspect ratio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Machine Tools and Manufacture
سال: 2009
ISSN: 0890-6955
DOI: 10.1016/j.ijmachtools.2008.07.015