Improving sinterability of ceramics using hybrid microwave heating
نویسندگان
چکیده
منابع مشابه
chemical recycling of polycarbonate waste using conventional heating and microwave assisted method
پلی کربنات یکی از پلاستیکهای مهمی است که به صورت گسترده در تولید لوحهای فشرده، قطعات رایانه، مواد ساختمانی و غیره مورد استفاده قرار می گیرد. این پلیمر بصورت عمده از تراکم مونومر بیس فنولa (bpa) و کربنیل کلرید یا دی متیل کربنات ها بدست می آید. در سالهای اخیر بازیافت شیمیایی پلی کربنات بیشتر مورد توجه بوده است. بازیافت شیمیایی پلی کربنات برای بدست آوردن مواد اولیه آن با روشهای متفاوتی مانند تجزی...
Mobile Asbestos Decontamination by Microwave Hybrid Heating
Within the European project "New Safe and Cost Effective Techniques Against Asbestos Risks" different methods for decontamination of asbestos in asbestos containing wastes, abbreviated as ACW from building industry were investigated. A mobile asbestos decontamination unit was developed, aiming at the complete disintegration of asbestos fibres on-site. The process is based on a chemo-thermal tre...
متن کاملInvestigations of Non-thermal Microwave Effects Using Hybrid Conventional/microwave Heating Calorimetry
A hybrid calorimeter is described whereby the test specimen may be heated using either hot air and/or microwave radiation. Thus it is possible to study phase transitions of materials under conditions ranging from purely conventional heating to pure microwave heating or mixtures thereof. Measurements using silver iodide showed that its phase change from the low temperature β-phase to the high te...
متن کاملMicrowave Drilling of Ceramics
The microwave-drilling technique using an open-end coaxial applicator was disclosed recently [1-3]. This paper presents new experimental and theoretical results of microwave-drilling studies in various ceramics, including mullite, alumina, and zirconia. The paper reviews the microwave-drill principles and describes the experimental setup and procedures. Aspects of igniting the microwavedrilling...
متن کاملMicrowave NDE of Ceramics
The objective of this work is to evaluate the potential of microwave techniques for detecting, classifying, and determining the dimensions of inclusions and surface cracks in structural ceramics such as Si3N4. Experimental results that show the feasibility of detecting various types of inclusions and voids in Si3N4 have been obtained, and these results are reviewed. In addition, the question of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Processing Technology
سال: 2009
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2008.05.037