Improving the Abrasive Wear Resistance of a Microalloyed Steel by Plasma Nitriding
نویسندگان
چکیده
منابع مشابه
The E ect of Low Temperature Plasma Nitriding on Wear Resistance of Ti6Al4V Alloy
The e ect of low temperature plasma nitriding on wear resistance of Ti6Al4V alloy were investigated. There have been several studies to investigate the low temperature plasma nitriding on Ti6Al4V alloy. Plasma nitriding processes under gas mixture of N2/H2 = 3 were performed at temperature 535 ◦C for duration of 4, 8 and 12 h. Adhesive wear tests were carried out by using a tribometer in block-...
متن کاملSurface Texturing-Plasma Nitriding Duplex Treatment for Improving Tribological Performance of AISI 316 Stainless Steel
Surface texturing-plasma nitriding duplex treatment was conducted on AISI 316 stainless steel to improve its tribological performance. Tribological behaviors of ground 316 substrates, plasma-nitrided 316 (PN-316), surface-textured 316 (ST-316), and duplex-treated 316 (DT-316) in air and under grease lubrication were investigated using a pin-on-disc rotary tribometer against counterparts of high...
متن کاملTHE EFFECT OF HEAT TREATMENT ON ABRASIVE WEAR RESISTANCE OF Fe-34Cr-4.5C%WT HARDFACING ALLOY
Abstract: Hardfacing is one of the most useful and economical ways to increase the service life of components subjected to abrasive wear. Iron based hardfacing alloys have long been considered as candidate coatings for wear-resistant applications in industry. In the present work two layer of Fe-34Cr-4.5C%wt hardfacing alloy was deposited on ASTM A36 carbon steel plates by SMAW method. The m...
متن کاملImproving the surface wear resistance of aluminum by electrical discharge process
In this study electrical discharge process was used to increase surface wear resistance of pure aluminum. Pulse-on-time and pulse current were considered as input parameters of the electrical discharge process. Experimental results reveal that the electrical discharge process is a successful method for improving the surface wear resistance of aluminum, so that this method has greatly increased ...
متن کاملNanosized precipitates in H13 tool steel low temperature plasma nitriding
A comprehensive study of pulsed nitriding in AISI H13 tool steel at low temperature (400°C) is reported for several durations. X-ray diffraction results reveal that a nitrogen enriched compound (-Fe2-3N, iron nitride) builds up on the surface within the first process hour despite the low process temperature. Beneath the surface, X-ray Wavelength Dispersive Spectroscopy (WDS) in a Scanning Elec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research
سال: 2015
ISSN: 1516-1439
DOI: 10.1590/1516-1439.307714