Improving the NMC111∣Polymer Electrolyte Interface by Cathode Composition and Processing
نویسندگان
چکیده
منابع مشابه
Improving the Reproducibility of P3HT:PCBM Solar Cells by Controlling the PCBM/Cathode Interface
Plastic photovoltaic devices offer a real potential for making solar energy economically viable. Unfortunately, bulk heterojunction (BHJ) solar cells fabricated from blends of the commonly used materials poly(3hexylthiophene), P3HT, and phenyl-C61-butyric acid methyl ester, PCBM, sometimes exhibit low efficiencies even when the procedures followed often produce solar cells with efficiencies exc...
متن کاملEvaluating Cathode Catalysts in the Polymer Electrolyte Fuel Cell
The polymer electrolyte membrane fuel cell (PEMFC) converts the chemical energy of hydrogen and oxygen (air) into usable electrical energy. At the cathode (the positive electrode), a considerable amount of platinum is generally required to catalyse the sluggish oxygen reduction reaction (ORR). This has implications regarding the cost in high-power applications, and for making a broad commercial...
متن کاملImproving the quality of barrier/seed interface by optimizing physical vapor deposition of Cu Film in hollow cathode magnetron
Related Articles Enhanced electrical performance of Ag–Cu thin films after low temperature microwave processing J. Vac. Sci. Technol. B 31, 011204 (2013) Facile fabrication of scalable patterned nickel nanocone arrays for field emission applications J. Vac. Sci. Technol. B 31, 02B104 (2013) Nanostructuring of molybdenum and tungsten surfaces by low-energy helium ions J. Vac. Sci. Technol. A 30,...
متن کاملImprovement of the Cathode Electrolyte Interphase on P2-Na2/3Ni1/3Mn2/3O2 by Atomic Layer Deposition.
Atomic layer deposition (ALD) is a commonly used coating technique for lithium ion battery electrodes. Recently, it has been applied to sodium ion battery anode materials. ALD is known to improve the cycling performance, Coulombic efficiency of batteries, and maintain electrode integrity. Here, the electrochemical performance of uncoated P2-Na2/3Ni1/3Mn2/3O2 electrodes is compared to that of AL...
متن کاملEffect of composition electrolyte on the morphology and photocatalytic activity of anodized titanium nanoporous
The morphology of titanium dioxide and titanium dioxide-tungsten trioxide nanocomposite films fabricated by anodizing in a glycerol solution containing 0.13 M NH4F and different quantity of Na2WO4 was investigated as a function of sodium tungstate concentrations. The effects of sodium tungstate concentration on the surface morphology were observed by scanning electron microscopy (SEM). It was c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Electrochemical Society
سال: 2020
ISSN: 1945-7111
DOI: 10.1149/1945-7111/ab7fb5