IMU-Based Automated Vehicle Slip Angle and Attitude Estimation Aided by Vehicle Dynamics
نویسندگان
چکیده
منابع مشابه
A Vision-Based Technique for Vehicle Slip and Velocity Estimation
This paper proposes a novel technique to estimate slips and velocities of an unmanned ground vehicle (UGV). A visual odometry sensor looking down the terrain surface is employed to measure the motion of the UGV, by tracking features selected from the terrain surface. The visual odometry sensor can provide motion information even when the terrain surface contains no distinctive features. A slidi...
متن کاملEstimation of Vehicle Roll Angle
Haldex Traction can with their Active Yaw Control prevent unwanted handling when driving a vehicle, by applying an extra torque with their all wheel drive system. To be able to calculate when and how this torque should be applied, it is important to the state information of the vehicle. When driving on banked roads, vehicle dynamics and sensor measurements are changed compared to when driving o...
متن کاملDesign on Adaptive Fuzzy Observer of Vehicle Side Slip Angle
A novel observer structure for vehicle side slip angle (β ) estimation is proposed, in which a local approximation of the nonlinear tire model is adopted. Fuzzy logic approach is adopted to combine the local observer models so as to deal with the nonlinear nature of vehicle dynamics. The derivation of observer’s state equations and the estimation mechanism is developed. By choosing the membersh...
متن کاملSlip Angle Observer of the Vehicle Body Side
Usually, a reduced car model contains only the state variables ( speed, body side slip angle and yaw rate), which are essential for the vehicle dynamic and ABS control. When certain of these state variables cannot be measured, observers are implemented without unacceptable expenses. Since in this case the system is a non-linear one, a Luenberger observer is not possible directly to be used. In ...
متن کاملNonlinear Body Slip Angle Observer for Electric Vehicle Stability Control
°Institute of Industrial Science, University of Tokyo 4-6-1 Komaba, Meguro-ku, Tokyo 153-8505, Japan This paper proposes a nonlinear observer for Body Slip Angle (β) estimation, in which a nonlinear tire model is adopted for the observer design. A newly developed method to identify parameters of road surface friction coefficient (μ) is introduced into this observer, which makes the observer ada...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2019
ISSN: 1424-8220
DOI: 10.3390/s19081930