In-nozzle flash boiling flow of multi-component fuel and its effect on near-nozzle spray
نویسندگان
چکیده
منابع مشابه
Numerical characterization of multi-nozzle spray cooling
This work aims to study the characteristics of multi-nozzle spray cooling using CFD method based on the fundamentals of air flow and liquid droplet collision dynamics. A mathematical model for the two-phase flow was presented. The simulations were performed using a EulerianeLagrangian approach. Focus was placed on revealing the flow behavior with multiple nozzles, the droplet trajectory, and th...
متن کاملExperimental study of the diesel injector nozzle sediment effect on fuel spray behavior
High pressure amount of fuel in new generation diesel engines’ injector equipped with multiple and small nozzle holes has created significant improvement in the outgoing spray behavior and engine performance. On the other hand, poor fuel quality and injector nozzle embedded in high temperature combustion chamber form fundamental deposits on the nozzle leading to fuel spray inappropriate behavio...
متن کاملNoise Generation in the Near-Nozzle Region of a Chevron Nozzle Jet Flow
This paper reports on the simulation of the near-nozzle region of a moderate Reynolds number cold jet flow exhausting from a chevron nozzle. The chevron nozzle considered in this study is the SMC001 nozzle experimentally studied by the researchers at the NASA Glenn Research Center. This nozzle design contains six symmetric chevrons that have a five-degree penetration angle. The flow inside the ...
متن کاملReacting Nozzle Flow
The two limits, “frozen” and “equilibrium” flow share an important property: both are isentropic flows (if we ignore friction or heat losses). This is because, in the frozen case no chemical change during expansion), there are no rate processes at all occurring, the molecules preserving their identity all the way, while in the equilibrium case, in which reactions do occur, their rate is so high...
متن کاملThe Effect of Transient Nozzle Flow on Detonation Tube Impulse
Impulse generation with gaseous detonation requires conversion of chemical energy into mechanical energy. Because of the poor performance of straight detonation tubes compared to conventional propulsion systems and the success of using nozzles on rocket engines, the effect of nozzles on detonation tubes is being investigated. The first experimental investigation measuring impulse by gaseous det...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Fuel
سال: 2019
ISSN: 0016-2361
DOI: 10.1016/j.fuel.2019.04.104