In-plane and interlaminar shear strength of a unidirectional Hi-Nicalon fiber-reinforced celsian matrix composite
نویسندگان
چکیده
منابع مشابه
Shear Strength of Fiber-Reinforced Clayey Sands
Consolidated-drained triaxial compression tests were conducted to compare the stress-strain and volume change response of sands and clayey sands reinforced with discrete randomly distributed poly-propylene fibers. The influence of various test parameters such as fiber content (0.0%, 0.5% and 1.0% by weight), clay content (0%, 10% and 20% by weight), relative density (50% and 90%) and confining ...
متن کاملRelationship of Interface Fracture Energy and Interlaminar Shear Strength of Carbon Fiber Reinforced Composite under Hydrothermal Treatment
The mechanical and physical properties of composite materials are greatly influenced by the structure and properties of fiber/matrix interface. Short beam shear test is often performed to evaluate the laminar interface properties in real applications, especially for studying them after a given hydrothermal treatment. However, the results depend on the interface and the matrix properties, so the...
متن کاملMode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
1.1 This test method describes the determination of the opening Mode I interlaminar fracture toughness, GIc, of continuous fiber-reinforced composite materials using the double cantilever beam (DCB) specimen (Fig. 1). 1.2 This test method is limited to use with composites consisting of unidirectional carbon fiber and glass fiber tape laminates with brittle and tough single-phase polymer matrice...
متن کاملEffect of TEOS Electrospun Nanofiber Modified Resin on Interlaminar Shear Strength of Glass Fiber/Epoxy Composite
Interlaminar shear strength (ILSS) of fiber reinforced polymer composite is an important property for most of the structural applications. Matrix modification is an effective method used to improve the interlaminar shear strength of composite. In this paper, EPON 862/w epoxy system was modified using Tetraethyl orthosilicate (TEOS) electrospun nanofibers (ENFs) which were produced using electro...
متن کاملHigh temperature shear strength of T650-35 / HFPE-II-52 polyimide matrix unidirectional composite
The shear strength of a 4-ply unidirectional composite laminate consisting of carbon fibers (T650-35) and a polyimide matrix (HFPE-II-52) was measured over a temperature range of 25 to 315C. The tests were performed using a Iosipescu test sample, modified to provide a more uniform shear stress distribution across the gauge section and loaded with an Arcan type test fixture. The test specimen de...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Ceramics International
سال: 2002
ISSN: 0272-8842
DOI: 10.1016/s0272-8842(02)00006-8