In-situ Formation of Bismuth-Based Iodine Waste Forms
نویسندگان
چکیده
منابع مشابه
suppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولSpectrophotometric Methods for Determination of Sunitinib in Pharmaceutical Dosage Forms Based on Ion-pair Complex Formation
Three rapid spectrophotometric methods were developed for the determination of sunitinib based on the formation of ion-pair complex in acidic medium with bromocresol purple, bromothymol blue, and bromophenol blue. The formed ion-pair complexes, extractable with chloroform, were measured at 422 nm for bromocresol purple, 425 nm for bromothymol blue and 427 nm for bromophenol blue. All these meth...
متن کاملSpectrophotometric Methods for Determination of Sunitinib in Pharmaceutical Dosage Forms Based on Ion-pair Complex Formation
Three rapid spectrophotometric methods were developed for the determination of sunitinib based on the formation of ion-pair complex in acidic medium with bromocresol purple, bromothymol blue, and bromophenol blue. The formed ion-pair complexes, extractable with chloroform, were measured at 422 nm for bromocresol purple, 425 nm for bromothymol blue and 427 nm for bromophenol blue. All these meth...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Microstructure control and iodine doping of bismuth telluride
On the materials scale, thermoelectric efficiency is defined by the dimensionless figure of merit zT . This value is made up of three material components in the form zT = Tα/ρκ, where α is the Seebeck coefficient, ρ is the electrical resistivity, and κ is the total thermal conductivity. Therefore, improving zT would require the reduction of κ and ρ while increasing α. However, due to the inter-...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MRS Proceedings
سال: 2007
ISSN: 0272-9172,1946-4274
DOI: 10.1557/proc-1043-t12-05