In Situ Monitoring of Drying Process of Masonry Walls
نویسندگان
چکیده
منابع مشابه
Homogenization of Interlocking Masonry Walls
In a previous publication the authors proposed a continuous model for describing the mechanical behaviour of ‘Running Bond’ masonry walls. Here a different masonry structure is considered. This structure is ‘bi-atomic’ in the sense that its pattern consists in two kind of blocks with different. The homogenization by differential expansions technique is used for obtaining an equivalent Cosserat ...
متن کاملMulti-scale analysis of masonry walls
Masonry is a heterogeneous structural material which exhibits a complex behaviour with potential cracking in each of its phases. Its structure (geometrical arrangement of mortar joints, quasi-brittle constituents) causes the appearance of complex composite failure modes with loading path dependence and strong damage-induced anisotropy effects. Large scale computations for masonry structures req...
متن کاملPolarimetric radar signature of masonry walls
A ground-penetrating radar with polarimetric capability has been used for investigating masonry walls. The obtained results show that hollow spaces inside masonry give a well-detectable polarimetric signature that can be usefully used for detecting internal cavities in walls, and for characterizing the masonry. r 2007 Published by Elsevier Ltd.
متن کاملEffective stiffness of unreinforced brick masonry walls
Code design of Unreinforced Masonry (URM) buildings is based on elastic analysis, which requires as input parameter the effective stiffness of URM walls. Current approaches estimate the effective stiffness as fixed ratio of the gross sectional stiffness but comparisons with experimental results have shown that this does not yield satisfactory predictions. In this paper, a recently developed ana...
متن کاملnon-linear study of various slit shear walls in steel structures
seismic retrofit strategies have been developed in the past few decades following the introduction of new seismic provisions and the availability of advanced materials and methods. it can be observed that new approaches to deal with more lateral forces are more innovative and more energy absorbent. in line with this, there is a growing trend toward the use of steel shear walls as a system with ...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energies
سال: 2020
ISSN: 1996-1073
DOI: 10.3390/en13236190