In situ X-ray characterization of uranium dioxide during flash sintering
نویسندگان
چکیده
منابع مشابه
In-Situ X-ray Characterization of Nanowires
Alex Weller, Georgia Institute of Technology, SURF 2008 Fellow Advisor: Dr. Robert Snyder, Mentor: Melanie Kirkham Introduction: Much research has taken place in recent years in the synthesis of ZnO nanowires (NWs) due to their unique electronic and optical properties that make them excellent candidates for the use in nano devices such as nanogenerators, LEDs, gas sensors and biosensors. Additi...
متن کاملIn situ X-ray nanotomography of metal surfaces during electropolishing
A low voltage electropolishing of metal wires is attractive for nanotechnology because it provides centimeter long and micrometer thick probes with the tip radius of tens of nanometers. Using X-ray nanotomography we studied morphological transformations of the surface of tungsten wires in a specially designed electrochemical cell where the wire is vertically submersed into the KOH electrolyte. ...
متن کاملIn-Situ X-Ray Characterization of Fiber Structure During Melt Spinning
The properties of a polymer are strongly influenced by its morphology. In the case of fibers from semicrystalline polymers this consists of the degree of crystallinity, the spacing and alignment of the crystalline regions, and molecular orientation of the polymer chains in the amorphous regions. Information on crystallinity and orientation can be obtained from X-ray analysis. In-situ X-ray char...
متن کاملDetermining the Content of Silicon Dioxide in Bauxites Using X-Ray Fluorescence Spectrometry
The X-ray fluorescence spectrometry and the MA.BM.006 reference spectrophotometric methods were used to determine the content of SiO2 (%) in bauxites from different deposits. The treatment of samples prior to the analysis involved the following steps: annealing, melting using the borax method, and the formation of beads. Certified reference bauxite samples were used for the cali...
متن کاملRoles of niobium pentoxide, vanadium pentoxide and titanium dioxide in the grain growth and sintering of uranium dioxide
Pure uo2 sinters readily at temperatures below 1600°c when non-stoichiometric oxygen introduced during the presintering treatment is available for diffusion and subsequent densification. In the absence of excess oxygen sintering occurs at temperatures above 1600°C by self-diffusion of stoichiometric oxygen in uo2 • Grain growth occurs when open porosity has been eliminated and is controlled by ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materialia
سال: 2018
ISSN: 2589-1529
DOI: 10.1016/j.mtla.2018.07.006