In Vitro Dissolution Testing with Flow-Through Method: A Technical Note
نویسندگان
چکیده
منابع مشابه
Technical Note : Why Is Vibration an Issue for Dissolution Testing ?
INTRODUCTION It has become apparent, in the recent past, that vibration within the tablet dissolution testing environment is a real issue. Although this may not have been too apparent in normal routine dissolution testing, the real impact of vibration has become a focal point as a result of the Prednisone “Calibrator Tablet” tests, which generally have to be performed every six months on each i...
متن کاملTwin Plate Weir: A Flow Measuring Device (TECHNICAL NOTE)
For efficient use of water, accurate measurement of flow in (field/laboratory) channels is required for many water resource projects. The present work is aimed to study the flow characteristics of a twin plate weir (two sharp-crested plates are placed one behind the other at some distance) under free and submerged flow conditions. Experiments are performed with four spacing of the twin plate we...
متن کاملGypsum Dissolution Effects on the Performance of a Large Dam (TECHNICAL NOTE)
Upper Gotvand dam is constructed on the Karun River located in the south west of Iran. In this paper, 2D and 3D models of the dam together with the foundation and abutments were constructed and several seepage analyses were carried out. Then the gypsum veins scattered throughout the foundation ground and also the seepage pattern were included in the models, hence the dissolution law of gypsum, ...
متن کاملBiorelevant Dissolution Testing of Drug-Eluting Stents: Experiences with a Modified Flow-Through Cell Setup
In vitro dissolution testing of drug-eluting stents (DES) poses a special challenge in terms of apparatus design due to the very specialized local treatment of the vessel wall in the immediate vicinity of the blood flowing through the vessel and the stent lumen. A vessel-simulating flow-through cell was designed to emulate the placement of a DES in vivo and the flow through the lumen in a simpl...
متن کاملA Multi-Objective Method for Network Reconfiguration (TECHNICAL NOTE)
This paper presents an algorithm based on multi-objective approach for network reconfiguration. Multiple objectives are considered for reduction in the system power loss, deviations of the nodes voltage and transformers loading imbalance, while subject to a radial network structure in which all the loads must be energized and no branch current constraint is violated. These three objectives are ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: AAPS PharmSciTech
سال: 2009
ISSN: 1530-9932
DOI: 10.1208/s12249-009-9339-6