Inclusion Formation and Microstructure Evolution in Low Alloy Steel Welds.
نویسندگان
چکیده
منابع مشابه
Evolution of Microstructure and Residual Stress under Various Vibration Modes in 304 Stainless Steel Welds
Simultaneous vibration welding of 304 stainless steel was carried out with an eccentric circulating vibrator and a magnetic telescopic vibrator at subresonant (362 Hz and 59.3 Hz) and resonant (376 Hz and 60.9 Hz) frequencies. The experimental results indicate that the temperature gradient can be increased, accelerating nucleation and causing grain refinement during this process. During simulta...
متن کاملLattice Misfit between Inclusion and Acicular Ferrite in Weld Metal of Low Carbon Low Alloy Steel
To clarify the mechanism of acicular ferrite formation in low carbon submerged arc weld metals of a Ti-B system with different aluminum contents, the lattice misfit between inclusion and acicular ferrite was investigated. The inclusions were directly sliced into thin foils by a focused ion beam device and crystallographic analyses were performed using a transmission electron microscope. These i...
متن کاملEvaluation of microstructure and mechanical properties of 410NiMo as an overlay layer on low alloy steel
The aim of this study is to reach an increased service life for parts using in sour environment by weld overlaying process. In this investigation, two successive layers of ER410NiMo were clad on low alloy steel substrates. To reduce the likelihood of Hydrogen Induced Cracking (HIC) and producing stable hydrogen traps, Post Weld Heat Treatment (PWHT) was conducted. Microstructural analysis, X-ra...
متن کاملEvaluation of microstructure and mechanical properties of 410NiMo as an overlay layer on low alloy steel
The aim of this study is to reach an increased service life for parts using in sour environment by weld overlaying process. In this investigation, two successive layers of ER410NiMo were clad on low alloy steel substrates. To reduce the likelihood of Hydrogen Induced Cracking (HIC) and producing stable hydrogen traps, Post Weld Heat Treatment (PWHT) was conducted. Microstructural analysis, X-ra...
متن کاملThe Evaluation of Corrosion Behavior of AISI 347 Stainless Steel to ASTM A335 Low Alloy Steel Dissimilar Welds
In the present study, the corrosion behavior of AISI 347 austenitic stainless steel to ASTM A335 low alloy steel dissimilar joint was investigated. For this purpose, two filler metals, ER309L and ERNiCr-3, were selected to be used during the gas tungsten arc welding process. To investigate the corrosion behavior of the joints after welding, the specimens were tested in 3.5% sodium chloride solu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2002
ISSN: 0915-1559
DOI: 10.2355/isijinternational.42.1344