Indirect Tensile Behaviour of Fibre Reinforced Alkali-Activated Composites
نویسندگان
چکیده
منابع مشابه
Synergetic Use of Thermal and Acoustic Emission in Studying Tensile Behaviour of Fibre Reinforced Composites
The possibility to combine the use of acoustic emission and thermal emission as real-time monitoring techniques on carbon-epoxy composites is the subject of this paper. Tensile tests are therefore performed, using a cross-head speed not too high so to enable a reliable detection of acoustic emission signals, but suitable also for the needs of the thermal emission technique,. The latter techniqu...
متن کاملEffect of Chemical Treatments on Flax Fibre Reinforced Polypropylene Composites on Tensile and Dome Forming Behaviour
Tensile tests were performed on two different natural fibre composites (same constituent material, similar fibre fraction and thickness but different weave structure) to determine changes in mechanical properties caused by various aqueous chemical treatments and whether any permanent changes remain on drying. Scanning electronic microscopic examinations suggested that flax fibres and the flax/p...
متن کاملEffect of inter-laminar fibre orientation on the tensile properties of sisal fibre reinforced polyester composites
In this present work, effects of interlamina fibre orientation on the tensile properties of composites were studied and the results were discussed. The varying types of fibre oriented composites were prepared using the compression moulding technique at a pressure of 17 MPa. The different types of oriented composites investigated were 90o/0 o /90 o, 0 o /90 o /0 o, 90 o /0 o /0 o /90 o, 0 o /45 ...
متن کاملMechanical Behaviour of Sisal Fibre Reinforced Cement Composites
Emphasis on the advancement of new materials and technology has been there for the past few decades. The global development towards using cheap and durable materials from renewable resources contributes to sustainable development. An experimental investigation of mechanical behaviour of sisal fibrereinforced concrete is reported for making a suitable building material in terms of reinforcement....
متن کاملExperiments on Tensile and Shear Characteristics of Amorphous Micro Steel (AMS) Fibre-Reinforced Cementitious Composites
Amorphous micro-steel (AMS) fibre made by cooling of liquid pig iron is flexible, light and durable to corrosion, then to be compatible with high flowable and disperable states of mixing as well as high ductile post-cracked performances to apply in fibre-reinforced cementitious composites. In the current research, AMS fibre-reinforced cementitious composites based on cement and alkali-activated...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Fibers
سال: 2018
ISSN: 2079-6439
DOI: 10.3390/fib6020030