Induction Heating of Inner Rolling Bearing Ring in ANSYS
نویسندگان
چکیده
منابع مشابه
Tapered Rolling Bearing Thermal Studies
An apparatus to simulate the thermal behavior of a 3/4 inch bore tapered roller bearing was constructed and used to determine tapered roller bearing thermal behavior. Bearing specimens can be loaded axially and/or radially while rotating. Shaft heating is also provided and mechanical losses measured. An infrared scanner and thermocouples allow for temperature measurement. An analytical model of...
متن کاملWavelet based Fault Classification for Rolling Element Bearing in Induction Machine
Induction motors plays the most important role in any industry. Induction motor faults results in motor failure causing breakdown and great loss of production due to shutdown of industry and also increases the running cost of machine with reduction in efficiency. This needs for early detection of fault with diagnosis of its root cause. In this research paper a wavelet based fault classification...
متن کاملControlled Microwave Heating Accelerates Rolling Circle Amplification
Rolling circle amplification (RCA) generates single-stranded DNAs or RNA, and the diverse applications of this isothermal technique range from the sensitive detection of nucleic acids to analysis of single nucleotide polymorphisms. Microwave chemistry is widely applied to increase reaction rate as well as product yield and purity. The objectives of the present research were to apply microwave h...
متن کاملRolling Bearing Fault Analysis by Interpolating Windowed DFT Algorithm
This paper focuses on the problem of accurate Fault Characteristic Frequency (FCF) estimation of rolling bearing. Teager-Kaiser Energy Operator (TKEO) demodulation has been applied widely to rolling bearing fault detection. FCF can be extracted from vibration signals, which is pre-treatment by TEKO demodulation method. However, because of strong noise background of fault vibration signal, it is...
متن کاملPrecision instrumentation for rolling element bearing characterization.
This article describes an instrument to measure the error motion of rolling element bearings. This challenge is met by simultaneously satisfying four requirements. First, an axial preload must be applied to seat the rolling elements in the bearing races. Second, one of the races must spin under the influence of an applied torque. Third, rotation of the remaining race must be prevented in a way ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Manufacturing Technology
سال: 2015
ISSN: 1213-2489,1213-2489
DOI: 10.21062/ujep/x.2015/a/1213-2489/mt/15/5/881