Inductive Power Transfer Subsystem for Integrated Motor Drive

نویسندگان

چکیده

An inductive power transfer subsystem for an integrated motor drive is presented in this paper. First, the concept of system overviewed, and its main components are described. Next, paper focused on subsystem, which includes a magnetically coupled resonant circuit two-stage energy conversion with appropriate control method. Simplified complex domain analysis provided applied procedure component selection explained. Furthermore, prototype Finally, based gallium nitride field effect transistors (GaN FET) experimentally tested, confirming feasibility concept.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Misalignment Tolerant Inductive Power Transfer (IPT) Systems

This Document contains a detailed technical report on the design and test of a system that performs data acquisition and wireless communication. The system is specifically designed for an Inductive Power Transfer (IPT) charging system consisting of two control systems implemented in order to achieve maximum efficiency. One on the primary side of the charging system, and one on the secondary sid...

متن کامل

Long range inductive power transfer system

We report upon a recently developed long range inductive power transfer system (IPT) designed to power remote sensors with mW level power consumption at distances up to 7 m. In this paper an inductive link is established between a large planar (1 x 1 m) transmit coil (Tx) and a small planer (170 x 170 mm) receiver coil (Rx), demonstrating the viability of highly asymmetrical coil configurations...

متن کامل

Integrated Power Module for Appliance Motor Drives

These modules represent a sophisticated, integrated solution for 3 phase motor drives used in a variety of appliances, such as washing machines, energy efficient refrigerators and air conditioning compressor drives in the 250 Watt to 2 Kilowatt power range. They utilize NPT (non-punch through) IGBTs matched with Ultra-soft recovery diodes to minimize EMI generation. In addition to the IGBT powe...

متن کامل

Maximum efficiency formulation for inductive power transfer with multiple receivers

This paper presents closed-form expressions of optimal loads that achieve the maximum efficiency for inductive power transfer (IPT) system with multiple receivers. We model the system as a passive N-port network and jointly optimize both reactive and resistive components of the loads. The derived expression allows one to predict RF-to-RF efficiency of IPT system with any number of receivers, un...

متن کامل

Compensation topology for flat spiral coil inductive power transfer systems

Inductive power transfer technology is now widely used to provide power into various devices, such as battery based vehicles, implant devices, portable equipment etc. Despite the rapid development of power electronics components, inductive power transfer technology still has some drawbacks. The output power is vulnerable to the magnetic coupling efficiency of two coils. If misalignment and disp...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Energies

سال: 2021

ISSN: ['1996-1073']

DOI: https://doi.org/10.3390/en14051412