Inelastic Deformation and Fracture of Laminated Graphite/Epoxy Tubes under Multiaxial Stress States.
نویسندگان
چکیده
منابع مشابه
Critical stiffness damage envelopes for multidirectional laminated structures under multiaxial loading conditions
Article history: Received 2 May 2015 Received in revised form 10 October 2015 Accepted 27 November 2015 Available online 28 November 2015 Load-bearing laminated structures undergo complex crack evolution processes and consequent stiffness degradation, which leads to a decline in their overall performance. Thus, consideration of damage evolution is important for stiffness critical applications. ...
متن کاملObservations of the Constitutive Response and Characterization of Filled Natural Rubber Under Monotonic and Cyclic Multiaxial Stress States
This work explores the monotonic and cyclic behaviors of filled, natural rubber. Results of stress-strain experiments conducted under stress states of simple, planar, and equibiaxial tension are presented. The ability of hyperelastic models to capture the observed response, as well as recent developments in constitutive modeling of filled rubber such as the consequences of the Mullins effect, a...
متن کاملNumerical/Experimental Analysis of the Deformation of Tubes under Concentrated Load
Distortion and deformation of tubes during machining operations are very important. In this study, a tube used in magnetic drum separator under concentrated load (machining load) is considered. Using finite element simulation, deformities and their dependence on parameters such as the thickness of the tube and the place of concentrated force are observed and predicted. To compare and confirm th...
متن کاملNew Insight on Deformation of Walnut/Ceramic Proppant Pack under Closure Stress in Hydraulic Fracture: Numerical Investigation
This study is an attempt to investigate the mechanical behavior of proppant packs deforming under compression loading. A generalized confined compression test (CCT) was simulated in the present study to investigate the deformation of walnut/ceramic proppants against compression. In this way, the CCT was simulated using ABAQUS explicit code. Unlike ordinary CCT, we obtained permeability of compr...
متن کاملLinkage between Ductile Fracture and Extremely Low Cycle Fatigue of Inconel 718 under Multiaxial Loading Conditions
Ductile fracture and extremely low cycle fatigue (ELCF) [1] are two common failure modes in aircraft engines and turbomachinery designs [2]; however, the linkage between these two failure modes under multi-axial loading conditions has never been systematically studied. Inconel 718 (IN718) is one type of high temperature alloys widely used in turbomachines. Specially designed specimens and tests...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1991
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.57.2930