Infiltration Kinetics of Al-12%Si Alloy into SiC Whiskers Preform
نویسندگان
چکیده
منابع مشابه
Anisotropic etching of SiC whiskers.
We have demonstrated a method of producing nanoplatelets or complex well-ordered nanostructures from silicon carbide (SiC) whiskers. Preferential etching of SiC whiskers in a mixture of hydrofluoric and nitric acids (3:1 ratio) at 100 degrees C results in the selective removal of cubic SiC and the formation of complex structures resembling a pagoda architecture. Possible mechanisms governing se...
متن کاملCrystallization kinetics of Al±La±Ni amorphous alloy
The crystallization kinetics of an Al89La6Ni5 amorphous alloy were studied by thermal analysis. Both continuous heating and isothermal DSC traces showed that the Al89La6Ni5 amorphous alloy undergoes a two-stage crystallization process upon heating. The ®rst transformation, in which fcc-Al precipitates from the amorphous matrix, is a nucleation and three-dimensional diusion-controlled growth pr...
متن کاملPhase Separation kinetics in Fe-Cr-Al alloy
9 The α α phase separation kinetics in a commercial Fe-20 wt% Cr-6% Al oxide dispersion-strengthened PM 1
متن کاملFracture mechanisms of aluminium cast alloy locally reinforced by SiC particles and Al_2O_3 whiskers under monotonic and cyclic load
In the present paper, fracture mechanisms and corresponding stress distributions in aluminium cast alloy locally reinforced by SiC particles and Al2O3 whiskers under monotonic and cyclic load are investigated experimentally and numerically. The material is monotonically and cyclically deformed to failure at room temperature. The fracture origin and the fracture path are investigated on the frac...
متن کاملFRACTIONAL RECRYSTALLIZATION KINETICS IN DIRECTLY COLD ROLLED Al-Mg, Al-Mg-Sc AND Al-Mg-Sc-Zr ALLOY
The evaluation of texture as a function of recrystallization has been characterized for directly cold rolled Al-6Mg, Al-6Mg-0.4Sc and Al-6Mg-0.4Sc-0.2Zr alloys. Samples were annealed isothermally at 400 °C for 1 to 240 minutes to allow recrystallization. Recrystallization kinetics of the alloys is analyzed from the micro-hardness variation. Isothermally annealed samples of aluminum alloys were ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1994
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.58.12_1436