Inflation of joined dissimilar elastic tubes

Elastic Tubes: Modeling Elastic Deformation of Hollow Tubes

The Cosserat theory of elastic rods has been used in a wide range of application domains to model and simulate the elastic deformation of thin rods. It is physically accurate and its implementations are efficient for interactive simulation. However, one requirement of using Cosserat rod theory is that the tubular object must have rigid cross-sections that are small compared to its length. This ...

Wave propagation in elastic tubes

Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation

The fundamental frequencies and mode shapes of steel and carbon fiber–reinforced plastic (CFRP) cylindrical shells with steel inserts were investigated using finite element analysis and modal testing. The free-free boundary condition was tested with modal testing using the roving hammer method and verified by finite element analysis using ABAQUS. The results show good agreement between the test...

Non-Newtonian fluid flow in elastic tubes

The knowledge on the non-Newtonian fluid flow behavior in inflatable and collapsible elastic tubes is important to applications such as biofluid mechanics in human body and the transport of food and liquids in pharynx (throat), esophagus and intestines. The ultrasound Doppler based velocity profiles are measured at a fixed position from the outlet of a horizontal collapsible elastic tube immers...

Navier-Stokes Flow in Cylindrical Elastic Tubes

Analytical expressions correlating the volumetric flow rate to the inlet and outlet pressures are derived for the time-independent flow of Newtonian fluids in cylindrically-shaped elastic tubes using a one-dimensional Navier-Stokes flow model with two pressure-area constitutive relations. These expressions for elastic tubes are the equivalent of Poiseuille and Poiseuille-type expressions for ri...