Influence Factors on PM<sub>2.5</sub> and PM<sub>10</sub> Emissions in Iron Ore Sintering Process
نویسندگان
چکیده
منابع مشابه
Influence of Preformation Process on Combustibility of Biochar and its Application in Iron Ore Sintering
A study was carried out into the use of preformation process to prepare biochar for replacing coke breeze in iron ore sintering. Two types of preformation process, thermo-compression process (TCP) and normal temperature process (NTP), were adopted. Results show that preformation contributed to improving the density of both raw biomass and biochar. Recommended preformation parameters for TCP wer...
متن کاملAtmospheric emission of polychlorinated naphthalenes from iron ore sintering processes.
Iron ore sintering processes constitute significant sources of dioxins, and studies have confirmed a close correlation between polychlorinated naphthalenes (PCNs) and dioxin formation. Thus, iron ore sintering processes are thought to be a potential source of PCNs, although intensive investigations on PCN emissions from sintering processes have not been carried out. Therefore, the aim of the pr...
متن کاملFactors Controlling High-temperature Zone Resistance to Airflow during Iron Ore Sintering
A fundamental study was carried out on the high-temperature zone flow resistance during iron ore sintering. In present work, firstly, quartz sand was used to replace iron ores to investigate the impact of temperature if bed structure has no change; then a three-layer bed structure was used to explore the primary factors controlling high-temperature zone structure for airflow. The zone where tem...
متن کاملHow to Measure Phase Distribution and Degree of Sintering in Iron Ore Pellets
Iron ore pellets are made from refined and ground ore that is balled into spheroids and then heat treated. Pellet properties are measured through standardized physical, chemical and metallurgical tests to guarantee a high quality end product. However to better understand the oxidation and sintering of iron ore pellets one has to study the microstructures. This paper provides a proof of concept ...
متن کاملMathematical Modeling and Simulation in Matlab/Simulink of Processes from Iron Ore Sintering Plants
This work presents the mathematic models of the basic processes from an iron ore processing plant. Based on the mathematic models, using the Matlab/Simulink platform, it was achieved the simulation of the dosing process and simulation of the sintering process. The achieved mathematic model allows the determination of the material flows in the charge at their chemical composition variation, or a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2016
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.isijint-2016-169