Influence of Additional Alloying Elements on Cellular Precipitation in Ni-Cr-Al Alloys

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Role of Alloying Elements on the Crevice Corrosion Behavior of Ni-Cr-Mo Alloys

The roles of the alloying elements Mo, Cr, and W in resisting crevice corrosion of UNS N06022, UNS N06625, and UNS N10362 have been studied under galvanostatic conditions in 5 mol/L NaCl at 150°C. Corrosion damage patterns were investigated using surface analytical techniques such as scanning electron microscopy and optical imaging, and the corrosion products characterized by energy dispersive ...

متن کامل

Oxidation – Nitridation of Ni-Cr-Al Alloys

A series of alloys containing 24-36 wt pct Cr and 13.5 – 25.0 wt pct Al was reacted with air at 1100 °C for 260 h. The products of isothermal reaction were scales of α-Al 2 O 3 plus small amounts of Cr 2 O 3 . These grew according to parabolic kinetics, interrupted by episodic weight losses caused by partial spallation. No nitridation occurred during the isothermal exposures. Reaction during th...

متن کامل

EFFECT OF HEAT TREATMENT AND ALLOYING ELEMENTS ON PRECIPITATION AND SURFACE BEHAVIOR OF Co-Cr-Mo ALLOYS

The microstructures of as-cast and heat-treated Co-Cr-Mo with addition of C, Si and Mn have been investigated with a focus on phase and dissolution of precipitates. The heat treatment temperatures and heating periods employed ranged from 1448 to 1548 K and 0 to 43.2 ks, respectively. The precipitates observed in the as-cast and heat-treated alloys were carbides (M23C6, eta-phase, and pi-phase) ...

متن کامل

Phase transitions in nanostructured Fe–Cr–Ni alloys prepared by mechanical alloying

Phase transition of Fe–18Cr–8Ni, Fe–15Cr–15Ni and Fe–15Cr–25Ni alloys during mechanical alloying (MA) and after subsequent annealing as studied. For Fe–18Cr–8Ni and Fe–15Cr–15Ni the resulting structure by MA was a nanostructured single-phase BCC solid solution ( ) which iffers from that predicted from equilibrium phase diagram. Furthermore, the equilibrium structure was not achieved after heat ...

متن کامل

Nanoscale Cellular Structures at Phase Boundaries of Ni-Cr-Al-Ti and Ni-Cr-Mo-Al-Ti Superalloys

The microstructural evolution of Ni-20 pct Cr wires was studied during pack cementation where Al and Ti, with and without prior cementation with Mo, are deposited to the surface of the NiCr wires and subsequently homogenized in their volumes. Mo deposition promotes the formation of Kirkendall pores and subsequent co-deposition of Al and Ti creates a triple-layered diffusional coating on the wir...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: DENKI-SEIKO[ELECTRIC FURNACE STEEL]

سال: 2008

ISSN: 0011-8389

DOI: 10.4262/denkiseiko.79.177