Influence of axial force and characteristics of axial force affecting on total knee replacement constraint test
نویسندگان
چکیده
منابع مشابه
The Effect of Axial Force Variations on Nonlinear Modeling and Seismic Response of Reinforced Concrete Structures
In order to increase the accuracy of evaluating seismic response of structures, it is critical to conduct dynamic analyses based upon precise nonlinear models being as consistent as possible with the real conditions of corresponding structures. The concentrated plasticity model including one elastic element and two nonlinear spring elements at both ends has been considered within the research c...
متن کاملMobile-bearing Total Knee Prostheses Reduce Axial Rotational Constraint Torque
INTRODUCTION: The current study compared in-vitro tibiofemoral axial rotational constraint between 2 posterior stabilized mobile-bearing knee prosthesis and their fixed-bearing counterparts. It was demonstrated that both mobile-bearing knees induced significantly less constraint torque compared to their fixed-bearing counterparts. Highly-constrained design of the fixed-bearing knees substantial...
متن کاملCurvature Effects on Thermal Buckling Load of DWCNT Under Axial Compression Force
In this article, curvature effects on elastic thermal buckling of double-walled carbon nanotubes under axially compressed force are investigated using cylindrical shell model. Also, the small scale effect is taken into account in the formulation. The dependence of the interlayer van der Waals (vdW) pressure on the change of the curvatures of the inner and outer tubes at that point is considered...
متن کاملEffect of Tool Speed on Axial Force, Mechanical Properties and Weld Morphology of Friction Stir Welded Joints of A7075-T651
The axial force measurement plays important role in tool designing and identification of its restrictions. Also, it is vital in design of machine mechanism and optimization of welding process parameters. In this study, a friction stir welded butt join on AA7075-T651 aluminum alloy plate is investigated. With change of some parameters, factors including axial force, mechanical properties, microh...
متن کاملElastic-Plastic Analysis of Bending Moment – Axial Force Interaction in Metallic Beam of T-Section
This study derives kinematic admissible bending moment – axial force (M-P) interaction relations for mild steel by considering elastic-plastic idealizations. The interaction relations can predict strains, which is not possible in a rigid perfectly plastic idealization. The relations are obtained for all possible cases pertaining to the locations of neutral axis. One commercial rolled steel T-se...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2021
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/1137/1/012041