Influence of Bath Composition on Tensile Ductility in Electrodeposited Bulk Nanocrystalline Nickel
نویسندگان
چکیده
منابع مشابه
Deformation of electrodeposited nanocrystalline nickel
The mechanisms of deformation and damage evolution in electrodeposited, fully dense, nanocrystalline Ni with an average grain size of ~30 nm and a narrow grain size distribution were investigated by recourse to (i) tensile tests performed in situ in the transmission electron microscope and (ii) microscopic observations made at high resolution following ex situ deformation induced by compression...
متن کاملHardness and Structure of Electrodeposited Nickel from a Nickel Sulfamate-Formamide Bath
The influence of various factors, such as current density, bath and annealing temperatures, on microhardness of electrodeposited nickel from a nickel sulfamateformamide bath was investigated. Bright, adherent, finegrained and almost defect-free nickel deposits with moderately high hardness were obtained at 50 "C and a current density of 0.6 Aldm2. The microhardness of the nickel deposits decrea...
متن کاملWork-Hardening Induced Tensile Ductility of Bulk Metallic Glasses via High-Pressure Torsion
The mechanical properties of engineering materials are key for ensuring safety and reliability. However, the plastic deformation of BMGs is confined to narrow regions in shear bands, which usually result in limited ductilities and catastrophic failures at low homologous temperatures. The quasi-brittle failure and lack of tensile ductility undercut the potential applications of BMGs. In this rep...
متن کاملDevelopment of tough, low-density titanium-based bulk metallic glass matrix composites with tensile ductility.
The mechanical properties of bulk metallic glasses (BMGs) and their composites have been under intense investigation for many years, owing to their unique combination of high strength and elastic limit. However, because of their highly localized deformation mechanism, BMGs are typically considered to be brittle materials and are not suitable for structural applications. Recently, highly-toughen...
متن کاملSuperior Tensile Ductility in Bulk Metallic Glass with Gradient Amorphous Structure
Over centuries, structural glasses have been deemed as a strong yet inherently 'brittle' material due to their lack of tensile ductility. However, here we report bulk metallic glasses exhibiting both a high strength of ~2 GPa and an unprecedented tensile elongation of 2-4% at room temperature. Our experiments have demonstrated that intense structural evolution can be triggered in theses glasses...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2011
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.m2010279