Influence of Fly Ash Particles on Surface Roughness and Friction Coefficient of Magnesium Metal Composites
نویسندگان
چکیده
منابع مشابه
Effect of surface roughness on steel-steel dry friction coefficient
The influence of surface roughness magnitude and direction on dry static friction coefficient between two similar steel samples has been studied through an experiment. A testing apparatus has been designed and fabricated to measure the friction coefficient for a few forms of surface asperity. According to the results of the experiments, dry friction coefficient is affected by both magnitude and...
متن کاملeffect of surface roughness on steel-steel dry friction coefficient
the influence of surface roughness magnitude and direction on dry static friction coefficient between two similar steel samples has been studied through an experiment. a testing apparatus has been designed and fabricated to measure the friction coefficient for a few forms of surface asperity. according to the results of the experiments, dry friction coefficient is affected by both magnitude and...
متن کاملInfluence of machining parameters on surface roughness and dry friction
Article history: Received 6 October, 2015 Accepted 7 March 2016 Available online 8 March 2016 Dry friction depends on the surface topography which, in turn, is governed by machining parameters in addition to several other factors,. Therefore, in order to establish a qualitative relationship among these factors, the surface roughness and coefficient of static friction are measured for specimens ...
متن کاملInfluence of polishing duration on surface roughness of resin composites.
There is a need for effective polishing instruments for resin composite restorations with highly polished surfaces. The purpose of this study was to investigate the influence of polishing duration on surface roughness of light-cured resin composites. Four polishing systems, Compomaster (Shofu), Silicone Points C Type (Shofu), Super Snap (Shofu) and Enhance Finishing and Polishing System (Dentsp...
متن کاملInfluence of High Temperatures on Flexural Strength of Foamed Concrete Containing Fly Ash and Polypropylene Fiber
In this study, the elevated temperature flexural strengths of lightweight foamed concrete (LFC) containing fly ash (FA) and polypropylene fiber (PF) was investigated experimentally and statistically. The variables included were the temperature degrees (in a range of 20 to 600°C), LFC densities of 600, 800, 1000, 1200 and 1400 kg/m3 and additive content. Two mixes were made by replacing 15% and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Darshan Institute on Engineering Research & Emerging Technology
سال: 2020
ISSN: 2320-7590
DOI: 10.32692/ijdi-eret/9.1.2020.2003