Influence of Frequency on High-Temperature Fatigue Behavior of 17-4 PH Stainless Steels
نویسندگان
چکیده
منابع مشابه
High-temperature Fatigue Crack Growth Behavior of 17-4 Ph Stainless Steels
The fatigue crack growth (FCG) behavior was investigated for 17-4 PH stainless steels in three heat-treated conditions, i.e., unaged (Condition A), peak-aged (Condition H900), and overaged (Condition H1150), at temperatures ranging from 300 to 500 C. The high-temperature fatigue crack growth rates (FCGRs) of Condition H1150 were increased with an increase in temperature. However, for Conditions...
متن کاملHigh Temperature Behavior of Dual Phase Steels
Dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500C. Stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500C, and smooth flow at the other temperatures. Both yield and ultimate tensile strengths increased with increasing testing temperature up to about 450<sup...
متن کاملThermal Fatigue Behavior of 400 Series Ferritic Stainless Steels
In this study, thermal fatigue properties of 400 series ferritic stainless steels have been evaluated in the temperature ranges of 200-800C and 200-900C. Systematic methods for control of temperatures within the predetermined range and measurement of load applied to specimens as a function of temperature during thermal cycles have been established. Thermal fatigue tests were conducted under ful...
متن کاملEffects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel
Department of Mechanical Engineering, Mississippi State University, Box 9552, Mississippi State, MS 39762, United States Center for Advanced Vehicular Systems (CAVS), Mississippi State University, Box 5405, Mississippi State, MS 39762, United States Department of Industrial and Systems Engineering, Texas A&M University, College Station, TX 77843, United States Department of Industrial and Syste...
متن کاملHot Deformation Behavior of 17-7 PH Stainless Steel
To investigate the hot deformation behavior of 17-7 PH stainless steel, hot compression tests were carried out at the temperatures of 950, 1050 and 1150 oC and strain rates of 0.001 s-1 to 0.1 s-1. Accordingly, the hot working behavior was studied by the analyses of flow stress curves, work hardening rate versus stress curves, exponent- type constitutive equations and deformed microstructures. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2003
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.44.713