Influence of nanometric silicon carbide on phenolic resin composites properties

Magnetic and Electrical Properties of Nanocrystalline Fe85Si10Ni5/Phenolic Resin Soft Magnetic Composites

In this work, nanocrystalline Fe85Si10Ni5 soft magnetic powders were prepared by mechanical alloying and subsequent annealing to reduce the internal stresses and lattice strains. The powders were mixed with phenolic resin and warm pressed to produce nanostructured soft magnetic composites. The effect of annealing time and temperature on the crystalline structure, microstructure and magnetic pro...

Effect of Hardener on Mechanical Properties of Carbon Fibre Reinforced Phenolic Resin Composites

In this paper the effect of hardener on mechanical properties of carbon reinforced phenolic resin composites is investigated. Carbon fibre is one of the most useful reinforcement materials in composites, its major use being the manufacture of components in the aerospace, automotive, and leisure industries. In this study, carbon fibres are hot pressed with phenolic resin with various percentages...

Shock-wave strength properties of boron carbide and silicon carbide

Effect of increasing corundum on mechanical properties of silicon carbide refractories

Oxide materials such as Al2O corundum has a great influence on the mechanical and oxidation properties of refractory or refractory materials. In this paper, the effect of Al2O3 powder density, apparent porosity, linear shrinkage, and oxidation resistance of SiC composite refractory materials is investigated. Meanwhile, the compressive and flexural strengths were investigated before and after he...

single vacuum bagging and autoclave curing system influence on physical and mechanical properties of phenolic composites

industrial production of thermoset composite components involves the application of a vacuum bagging and autoclave pressure to minimize void percentage, usually to less than 5%. phenolic resin systems generate water as a reaction byproduct via condensation reactions during curing at elevated temperatures. in this paper, vacuum bagging and simple manufactured autoclave curing systems are used fo...