Influence of Nominal Maximum Aggregate Size and Aggregate Gradation on Pore Characteristics of Porous Asphalt Concrete
نویسندگان
چکیده
منابع مشابه
Effects of Nominal Maximum Aggregate Size on the Performance of Stone Matrix Asphalt
It is well known that the performance of hot mix asphalt (HMA) in service life is closely related to a proper aggregate gradation. A laboratory study was conducted to investigate the effects of nominal maximum aggregate size (NMAS) on the performance of stone matrix asphalt (SMA). The volumetric characteristics and performance properties obtained from wheel tracking tests, permeability test, be...
متن کاملhistological evaluation of the effect of three medicaments; trichloracetic acid, formocresol and mineral trioxide aggregate on pulpotomized teeth of dogs
چکیده ندارد.
15 صفحه اولEffects of Compactor Types on Aggregate Orientation of Asphalt Mixtures
More than 90% of Malaysian roads are constructed using asphaltic concrete. However, previous investigations of asphaltic concrete have mainly concentrated on the macroscopic properties of the composite materials based on the assumption that the mixtures are homogeneous and isotropic. This paper applies a digital image processing technique to compare the orientations of coarse aggregate particle...
متن کاملImpact of Aggregate Gradation and Type on Hot Mix Asphalt Rutting In Egypt
Rutting of flexible pavement is considered one of the major pavement distresses noted around the world and in Egypt. Many investigators showed at about 55 to 80% of rutting occurred in the surface layer. Rutting of asphalt surface layer may be due to many causes happened during construction phase and service phase. The main objectives of this research are to evaluate the impact of aggregate gra...
متن کاملInfluence of Aggregate Size and Fraction on Shrinkage Induced Micro-cracking of Mortar and Concrete
In this paper, the influence of aggregate size and volume fraction on shrinkage induced micro-cracking and permeability of concrete and mortar was investigated. Nonlinear finite element analyses of model concrete and mortar specimens were performed. The aggregate diameter was varied between 2 and 16 mm. Furthermore, a range of volume fractions between 0.1 and 0.5 was studied. The nonlinear anal...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2020
ISSN: 1996-1944
DOI: 10.3390/ma13061355