Influence of Polycarbonate Oligomer (PC-O) Addition on Flowability and Appearance Property of Injection Molded Polycarbonate (PC)
نویسندگان
چکیده
منابع مشابه
Experimental and Numerical Investigation of Laser Assisted PC to Polycarbonate Welding
Laser welding is a novel method for direct joining of metals and polymers, which leads to a mechanical and chemical bond between metal and polymer. In this study, feasibility of dissimilar joining between St12 and polycarbonate is studied theoretically. Then, the ND: YAG laser is implemented to join St12 and Polycarbonate. Empirical results indicate creation of a joint between St12 and polycarb...
متن کاملExperimental and Numerical Investigation of Laser Assisted PC to Polycarbonate Welding
Laser welding is a novel method for direct joining of metals and polymers, which leads to a mechanical and chemical bond between metal and polymer. In this study, feasibility of dissimilar joining between St12 and polycarbonate is studied theoretically. Then, the ND: YAG laser is implemented to join St12 and Polycarbonate. Empirical results indicate creation of a joint between St12 and polycarb...
متن کاملLifetime assessment of Bisphenol-A Polycarbonate (BPA-PC) plastic lens, used in LED-based products
Article history: Received 25 June 2013 Received in revised form 9 September 2013 Accepted 10 September 2013 Available online xxxx In this investigation, the accelerated optical degradation of two different commercial Bisphenol-A Polycarbonate (BPA-PC) grades under elevated temperature stress is studied. The BPA-PC plates are used both in light conversion carriers in LED modules and encapsulants...
متن کاملThermo-Responsive Shape-Memory Effect and Surface Features in Polycarbonate (PC)
The influence of programming strain and temperature on the shape memory effect and surface morphology in programmed polycarbonate (PC) samples via uni-axial stretching is investigated. It is found that the samples programmed at around the glass transition start temperature not only have micro-cracks on their surface, but also show a necking phenomenon. Furthermore, the surface of the necked are...
متن کاملEffects of Homogeneous Low Voltage Electron Beam Irradiation on Adhesive Strength of Polycarbonate (PC) Sheet Covered with Nylon6 Film
The effects of homogeneous low voltage electron beam irradiation (HLEBI) on the adhesive strength of different polymers without glue but with sterilization were investigated. HLEBI at more than 0.043MGy generated adhesive force and enhanced fracture strain at the interface in polycarbonate (PC) composites covered with nylon6 film. HLEBI at less than 0.130MGy increased the elasticity (d =d") and...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Seikei-Kakou
سال: 2016
ISSN: 0915-4027,1883-7417
DOI: 10.4325/seikeikakou.28.389