Influence of PTFE Content in Microporous Layer Coated Gas Diffusion Layer on Hydrophobicity and PEFC Performance(Thermal Engineering)
نویسندگان
چکیده
منابع مشابه
Influence of Afterbody and Boundary Layer on Cavitating Flow
The characteristics of a cavitation water tunnel test setup and the experiments of cavitation around different models are given in this paper. Models of test are formed from combination of head and variable length afterbody. The experiments are performed initially with the smooth head and then with the roughened head. Cavitation initiates both in the wake and after the head. If the nose of mode...
متن کاملSingle walled carbon nanotube in the reaction layer of gas diffusion electrode for oxygen reduction reaction
In this paper, the effect of surface area of reaction layers in gas diffusion electrodes on oxygen reduction reaction was investigated. For this purpose, various amounts (0.1, 0.2, 0.3, 0.4, 0.5, 1, 1.5 and zero %wt of total loading of reaction layer) of single walled carbon nanotube (SWCNT) were inserted in the reaction layer. The performance of gas diffusion electrodes for oxygen reduction re...
متن کاملUsing Orthorhombic Lattice Boltzmann Model to Research the Liquid Transport in Gas Diffusion Layer with Different Micro Porous Layer Coated
Water management in gas diffusion layer (GDL) and micro porous layer (MPL) poses a great impact on performance of proton exchange membrane fuel cells (PEMFCs). And enhancement of the performance of fuel cells requires an appropriate water balance between the conservation of membrane humidity and the discharge of excess water produced in the cell. The Lattice Boltzmann method (LBM) can enable mo...
متن کاملPreparation of thin layer of TiO2 on glazed tile substrate and changing hydrophilic to hydrophobicity behavior
The aim of this study is to create TiO2 coating on the tile substrate using cell-gel and immersion method. Initially, TiO2 coating was prepared by sol gel method and then, deposition was performed in three stages with different immersion periods of 20, 40 and 60 s and finally, the samples were calcined at 450 °C. The phases and microstructural characteristics of the samples were analyzed using ...
متن کاملModeling and Optimization of non - isothermal two- phase flow in the cathode gas diffusion layer of PEM fuel cell
In this paper, a non-isothermal two-phase flow in the cathode gas diffusion layer (GDL) of PEM fuel cell is modeled. The governing equations including energy, mass and momentum conservation equations are solved by numerical methods. Also, the optimal values of the effective parameters such as the electrodes porosity, gas diffusion layer (GDL) thickness and inlet relative humidity are calculated...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
سال: 2010
ISSN: 0387-5016,1884-8346
DOI: 10.1299/kikaib.76.761_101