INFLUENCE OF SOLAR POWER PLANTS ON LOW-VOLTAGE DISTRIBUTION NETWORKS

Optimal Coordinated Voltage Control in Distribution Networks in presence of Solar and Wind Power Plants Considering Uncertainties

Abstract: In the last decade, the amount of distributed generation connected to the distribution network is increasing. The presence of distributed generation resources in distribution systems has a great influence on its behavior and it is necessary to consider the impact of these resources on the distribution network design. In this study, Optimal Coordinated Voltage Control (OCVC) using wind...

fault location in power distribution networks using matching algorithm

چکیده رساله/پایان نامه : تاکنون روش‏های متعددی در ارتباط با مکان یابی خطا در شبکه انتقال ارائه شده است. استفاده مستقیم از این روش‏ها در شبکه توزیع به دلایلی همچون وجود انشعاب‏های متعدد، غیر یکنواختی فیدرها (خطوط کابلی، خطوط هوایی، سطح مقطع متفاوت انشعاب ها و تنه اصلی فیدر)، نامتعادلی (عدم جابجا شدگی خطوط، بارهای تک‏فاز و سه فاز)، ثابت نبودن بار و اندازه گیری مقادیر ولتاژ و جریان فقط در ابتدای...

Influence of the Parameters of Disk Winding on the Impulse Voltage Distribution in Power Transformers

Overvoltage distribution along the transformer winding must be uniform to certify the safety of the operation of the power transformer. Influence of the parameters variation on the impulse voltage distribution (IVD) in disk winding transformer is going to be analyzed which hasn’t been analyzed on this type of winding in the previous papers. In this research, a transformer with disk winding and ...

Planning of Distribution Networks for Medium Voltage and Low Voltage

Distributed Generation and Its Impact on Power Quality in Low-Voltage Distribution Networks

This chapter is dedicated to review and investigate present approaches to power quality assessment in low-voltage (LV) networks with distributed generation (DG). Two comple‐ mentary approaches are considered: firstly, origin of the emission limits requirement for the DG is searched in general electromagnetic compatibility (EMC) conditions used for the equipment and adopted to DG; secondly, rule...