Influence of Solution Treatment Process Parameters on Semi-Solid 7075 Al Alloy Slurry
نویسندگان
چکیده
منابع مشابه
Influence of Process Parameters on the Mechanical Behavior of an Ultrafine-Grained Al Alloy
Aluminum alloys with nanocrystalline (NC) and ultrafine grain (UFG) size are of interest because of their strengths that are typically 30 pct greater than conventionally processed alloys of the same composition. In this study, UFG AA 5083 plate was prepared by quasi-isostatic (QI) forging of cryomilled powder, and the microstructure and mechanical behavior was investigated and compared with the...
متن کاملMechanical Properties and Spring -Back Investigation in Creep Age Forming Process of 7075 Al Alloy
Creep age forming (CAF) process is a novel metal forming method with major benefits including improved mechanical properties and cost reduction for aviation industry applications. CAF happens due to creep phenomenon and stress-release during the artificial aging of heat-treatable aluminum alloys. In this work, the creep age forming of 7075 Aluminum alloy at 120, 150 and 180 °C for 6, 24 and 48...
متن کاملA Study on Effect of Process Parameters on the Expansion of Thin Walled Aluminium 7075 Tubes
This paper deals with the effect of process parameters on the peak load and the energy absorption of the expansion of thin walled tubes using a die. The energy absorption and peak load during the expansion process were calculated for various punch angles (α) and with different expansion ratios (rp/ro) at different temperatures (T) by finite element analysis where rp is the punch outer radius an...
متن کاملInfluence of pre-treatment on the drying process of apricots
ABSTRACT- Drying has been used for the preservation of fruits since ancient times. Dried apricot reduces the damages, weight and volume losses, packaging space, storage and handling costs. In this paper, the effects of hot air dryer on an Iranian apricot cultivar ”Noori” have been investigated. The experiment was conducted at three temperatures (30, 40 and 50oC), three fruit thicknesses (5, 10 ...
متن کاملRefining Mechanism of 7075 Al Alloy by In-Situ TiB2 Particles
The nucleation undercooling of TiB₂/7075 Al matrix composites, the microstructure observed after solidification at different cooling rate, and the size and distribution of TiB₂ particles were investigated. The experimental results have shown that the grain sizes of TiB₂/7075 Al matrix composites firstly decreased, then increased, and finally decreased again with the increase of TiB₂ content. Th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Material Sciences
سال: 2016
ISSN: 2160-7613,2160-7621
DOI: 10.12677/ms.2016.66042