Influences on the Fabrication of Diffractive Optical Elements by Injection Compression Molding
نویسندگان
چکیده
منابع مشابه
control of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولInvestigation of effective parameters on fabrication of alumina parts by low pressure injection molding (LPIM) method
Low pressure injection molding (LPIM) method in this paper is investigated as a method of forming alumina parts. This is one of the methods of making engineering ceramics with complex shapes and high dimensional accuracy. In this method, a binder system (paraffin wax + carnuba wax) was used as a plastic agent for easy formation of alumina particles. Different parameters such as feedstock temper...
متن کاملFABRICATION OF PIEZOELECTRIC CERAMlClPOLYMER COMPOSITES BY INJECTION MOLDING
Research at the Materials Research Laboratory, Pennsylvania State University has demonstrated the potential for improving hydrophone performance using piezoelectric ceramic/polymer composites. As part of an ONR-funded initiative to develop cost-effective manufacturing technology for these composites, Materials Systems is pursuing an injection molding ceramic fabrication approach. This paper bri...
متن کاملCompression Molding of Refractive and Diffractive Hybrid Glass Lenses
INTRODUCTION Refractive and diffractive hybrid lenses have been designed and implemented for some industrial applications. These optical elements however are limited to low volume production or specific materials such as polymers. Although plastic lenses can be fabricated using injection molding into different geometries at high volume, these optics do not perform well under rigorous conditions...
متن کاملLithographic fabrication of diffractive optical elements in hybrid sol-gel glass on 3-D curved surfaces.
We demonstrate the lithographic fabrication of diffractive optical elements (DOEs) in hybrid SiO2/TiO2 sol-gel glass on 3-D curved surfaces. The concentric circular gratings with periods of 20 μm, 10 μm and 5 μm have been fabricated in sol-gel glass on concave lens by laser direct writing successfully. Continuous 3-Dimensional surface relief with a height of 435 nm, 110 nm and 50 nm has been ob...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Manufacturing and Materials Processing
سال: 2018
ISSN: 2504-4494
DOI: 10.3390/jmmp2010005