Influencing Factors Research on Fatigue Performance of Interference-fit Bolted Composite Joints
نویسندگان
چکیده
منابع مشابه
Detection of Fatigue Cracks and Torque Loss in Bolted Joints
Fatigue crack growth during the service life of aging aircraft is a critical issue and monitoring of such cracks in structural hotspots is the goal of this research. This paper presents a procedure for classification and detection of cracks generated in bolted joints which are used at numerous locations in aircraft structures. Single lap bolted joints were equipped with surface mounted piezoele...
متن کاملan investigation on influencing factors on tourists shopping attitude of iranian handmade carpet in isfahan
چکیده ندارد.
15 صفحه اولA review on stress distribution, strength and failure of bolted composite joints
In this study, analytical models considering different material and geometry for both single and double-lap bolted joints were reviewed for better understand how to select the proper model for a particular application. The survey indicades that the analytic models selected for the adhesively single or double bolted lap joints, as well as T, scarf, and stepped joints, with linear material pr...
متن کاملFatigue behaviour of composite adhesive lap joints
This paper is concerned with a fatigue study of composite adhesive lap joints produced from a bi-directional woven E-glass fibres and polypropylene. The adhesive used was a Bostik 7452 (Rubber & Plastics Grade) ethyl cyanoacrylate type. The effects of layer orientation, lap joint length and water immersion on the fatigue behaviour were studied. The specimens were immersed in water during period...
متن کاملEvaluation of Fatigue Life Reduction Factors at Bolt Hole in Double Lap Bolted Joints Using Volumetric Method
In this research, the influence of bolt preload on the fatigue strength of 2024-T3 aluminium alloy double lap bolted joints has been studied experimentally and numerically. To do so, three sets of the specimens were prepared and each of them subjected to tightening torque of 1,2.5 and 5 N-m and then fatigue tests were conducted under various cyclic axial load levels. In the numerical method, th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: DEStech Transactions on Engineering and Technology Research
سال: 2018
ISSN: 2475-885X
DOI: 10.12783/dtetr/amee2018/25301