Initiation Process of Type I Pitting Corrosion on Copper Water-Tubes

Copper Tube Pitting in Santa Fe Municipal Water Caused by Microbial Induced Corrosion

Many copper water lines for municipal drinking water in Santa Fe, New Mexico USA, have developed pinhole leaks. The pitting matches the description of Type I pitting of copper, which has historically been attributed to water chemistry and to contaminants on the copper tubing surface. However, more recent studies attribute copper pitting to microbial induced corrosion (MIC). In order to test for...

Pitting Corrosion Monitoring Using Acoustic Emission

Roughness, Residual Stresses and Pitting Corrosion Effect on Shot

Original scientific paper The paper deals with the effect of roughness, residual stresses and pitting corrosion on different shot peened (SP) ENAW 7075 aluminium alloy in different states. Suitable residual stress profile increases the applicability and life cycle of mechanical parts, treated by shot peening. Pitting corrosion has a major influence on aging of structural elements made of high s...

Microbiologically induced corrosion of copper pipes in low-pH water

The aim of this paper was to study the influence of microbial biofilms on the high copper levels measured in the drinking water of rural houses. Drinking water parameters and copper pipe surfaces were analysed in the copper plumbing systems of rural and urban houses. The water in rural houses had pH values of 6.2 and alkalinity values of 63mg/L as CaCO3, whereas in urban houses the pH values we...

Numerical Simulation of Material Strength Deterioration due to Pitting Corrosion

Pitting corrosion is an insidious form of localized corrosion a ecting characteristics of various engineering metallic alloys. Currently very limited literature exists with regard to systematic characterization of pitted surfaces or the efficient use of numerical methods to assess its effect, i.e. fatigue life reduction caused by the state of a corroded specimen and particularly through the stu...