Ink-jet Printed BaTiO3 for Photonics
نویسندگان
چکیده
منابع مشابه
Ink-Jet Printed Nanoparticle Microelectromechanical Systems
We report a method to additively build threedimensional (3-D) microelectromechanical systems (MEMS) and electrical circuitry by ink-jet printing nanoparticle metal colloids. Fabricating metallic structures from nanoparticles avoids the extreme processing conditions required for standard lithographic fabrication and molten-metal-droplet deposition. Nanoparticles typically measure 1 to 100 nm in ...
متن کاملAll ink-jet printed polyfluorene photosensor for high illuminance detection
An all-printed photosensor based on polyfluorene derivatives has been developed for high illuminance range detection (>100 klux). The active layer is a blend of hole-accepting poly(9,9’-dioctylfluorene-cobis-N,N’-(4-butylphenyl)-bis-N,N’-phenyl-1,4-phenylenediamine) (PFB) and electron-accepting poly(9,9’-dioctylfluorene-co-benzothiadiazole) (F8BT). A top-absorbing architecture was used with pol...
متن کاملInk Jet Printed Thin Films on Glass and Polyimide Substrates
Silver conductive thin films deposited on glass and polyimide substrates by using ink jet printing are studied in this work. Characterization of the printed thin films and comparison with sputtered films are investigated. The micro texture, residual stress, adhesion, hardness, optical reflectance, and electric resistance of the thin films are discussed. The result shows that the ink jet printin...
متن کاملAn Ink-Jet Printed Eddy Current Position Sensor
An eddy current sensor with an ink-jet printed flexible inductor has been designed and fabricated. The inductor has been designed by means of software developed in-house. It has been fabricated by ink-jet printing with silver ink on a flexible substrate. The inductor is a part of the oscillator circuit whose oscillating frequency is measured by a microcontroller. The sensor characteristics have...
متن کاملMechanical Characterization of Ink-Jet Printed Ag Samples on Different Substrates
In this paper, the main activity was to investigate how different substrates, temperature of sintering and percentage of silver ink containing silver nanoparticles influence on Young’s modulus and hardness of printed silver thin samples. Samples were prepared by low cost ink-jet printing technique using Dimatix Material Printer on polyimide flexible substrate and slide glass. Characterization o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MRS Proceedings
سال: 2012
ISSN: 0272-9172,1946-4274
DOI: 10.1557/opl.2012.1066