Inkjet-Printed Planar Biochips for Interfacial Detection of Biomoleculars
نویسندگان
چکیده
منابع مشابه
Inkjet printed Prussian blue films for hydrogen peroxide detection.
An inkjet printing method is described to fabricate hydrogen peroxide (H(2)O(2)) sensors. Insoluble Prussian blue (PB) nanoparticles were dispersed in aqueous solvent, and were printed on screen printed carbon electrodes with a piezoelectric inkjet printer for H(2)O(2) detection. The electrochemical behavior of the printed sensors was studied by using cyclic voltammetry and chronoamperometry....
متن کاملDetection of Bacteria Using Inkjet-Printed Enzymatic Test Strips
Low-cost diagnostics for drinking water contamination have the potential to save millions of lives. We report a method that uses inkjet printing to copattern an enzyme-nanoparticle sensor and substrate on a paper-based test strip for rapid detection of bacteria. A colorimetric response is generated on the paper substrate that allows visual detection of contamination without the need for expensi...
متن کاملInkjet-printed graphene electronics.
We demonstrate inkjet printing as a viable method for large-area fabrication of graphene devices. We produce a graphene-based ink by liquid phase exfoliation of graphite in N-methylpyrrolidone. We use it to print thin-film transistors, with mobilities up to ∼95 cm(2) V(-1) s(-1), as well as transparent and conductive patterns, with ∼80% transmittance and ∼30 kΩ/□ sheet resistance. This paves th...
متن کاملMetal-based Inkjet Inks for Printed Electronics
A review on applications of metal-based inkjet inks for printed electronics with a particular focus on inks containing metal nanoparticles, complexes and metallo-organic compounds. The review describes the preparation of such inks and obtaining conductive patterns by using various sintering methods: thermal, photonic, microwave, plasma, electrical, and chemically triggered. Various applications...
متن کاملInkjet Printed Fet for Biosensing Applications
The developed bio-field effect transistor (BioFET) consists in nano-silver ink printed source and drain electrodes, a polymeric organic semiconductor, dielectric layer based on methyl methacrylate (MMA) and finally the reference electrode of silver-silver chloride ink. The thickness of the dielectric layer was optimized and characterized by Scanning Electron Microscopy (SEM) and by electrical m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Materials Interfaces
سال: 2017
ISSN: 2196-7350
DOI: 10.1002/admi.201700588