Instability of a square sheet under symmetric biaxial loading
نویسندگان
چکیده
منابع مشابه
Failure of Fibrous Composite Plates under Static Biaxial Planar Loading
This paper outlines an experimental investigation carried out for the analysis of failure mechanisms in fibrous laminated composite plates containing stress raisers, in the form of cutouts, under static biaxial planar compressive loadiing. A specially designed biaxial loadiing frame was used to test a series of 48 ply graphite/epoxy composite laminated plates with centrally located circular hol...
متن کاملWrinkling Analysis of A Kapton Square Membrane under Tensile Loading
A buckling solution and a non-linear post buckling solution were employed for the wrinkling analysis of a tensioned Kapton square membrane. The buckling solution with significantly reduced bending stiffness creates localized buckling modes accounting for the wrinkle formation in the membrane. The non-linear post buckling solution with an updated Lagrangian scheme describes the detailed wrinkle ...
متن کاملFinite Plate with Circular and Square Hole under Partial Loading
In this paper a general analytical solution is obtained to find stress distribution in a finite elastic plate with a circular or square hole subjected to arbitrary biaxial partial loading using modified boundary condition by assuming plane stress conditions. The method employed is based on solution of circular hole in finite rectangular plate. This plate is mapped to circular ones and the parti...
متن کاملPrediction of Crack Initiation Direction for Inclined Crack Under Biaxial Loading by Finite Element Method
This paper presents a simple method based on strain energy density criterion to study the crack initiation angle by finite element method under biaxial loading condition. The crack surface relative displacement method is used to eliminate the calculation of the stress intensity factors which are normally required. The analysis is performed using higher order four node quadrilateral element. The...
متن کاملAn experimental study of the superelastic effect in a shape-memory Nitinol alloy under biaxial loading
Constitutive laws for shape-memory alloys subjected to multiaxial loading, which are based on direct experimental observations, are generally not available in the literature. Accordingly, in the present work, tension–torsion tests are conducted on thin-walled tubes (thickness/radius ratio of 1:10) of the polycrystalline superelastic/shape-memory alloy Nitinol using various loading/unloading pat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Brazilian Society of Mechanical Sciences
سال: 2000
ISSN: 0100-7386
DOI: 10.1590/s0100-73862000000400004