Insulin sensor based on nanoparticle-decorated multiwalled carbon nanotubes modified electrodes
نویسندگان
چکیده
منابع مشابه
All-printed infrared sensor based on multiwalled carbon nanotubes
This contribution deals with all-printed infrared sensors fabricated using multiwalled carbon nanotubes deposited on a flexible polyimide substrate. A high responsivity of up to 1.2 kV/W is achieved at room temperature in ambient air. We evidence a strong dependence of the device transduction mechanism on the surrounding atmosphere, which can be attributed to bolometric effect interference with...
متن کاملSupermolecular switches based on multiwalled carbon nanotubes
Electrostatically actuated nanoelectromechanical switches based on intershell displacement mechanisms within batch fabricated, bidirectional multiwalled carbon nanotube MWNT bearings are reported. Multiple devices with a 220 nm pitch are constructed within individual MWNT supermolecules. Experimental results on performance metrics including low switching voltages 0.8 to 6 V , repeatability, hys...
متن کاملDiverse chemiresistors based upon covalently modified multiwalled carbon nanotubes.
A diverse array of multiwalled carbon nanotube (MWCNT) sensory materials have been synthesized and used to create sensors capable of identifying volatile organic compounds (VOCs) on the basis of their functional groups. Functionalized MWCNTs with a series of cross-sensitive recognition groups were successfully synthesized via zwitterionic and post-transformation synthetic procedures. The incorp...
متن کاملTemperature Dependence of Sensors Based on Silver-Decorated Nitrogen-Doped Multiwalled Carbon Nanotubes
Access to the published version may require subscription. Vapor sensors are easily fabricated onto alumina substrates using foils of silver-decorated nitrogen-doped multiwalled carbon nanotubes (CN í µí±-MWNTs-Ag) as active sensing material. The vapor sensors are tested using carbon disulfide, acetone, ethanol, and chloroform vapors. The CN í µí±-MWNTs are produced by chemical vapor depositio...
متن کاملCorrection: Glucose Biosensor Based on a Glassy Carbon Electrode Modified with Polythionine and Multiwalled Carbon Nanotubes
A novel glucose biosensor was fabricated. The first layer of the biosensor was polythionine, which was formed by the electrochemical polymerisation of the thionine monomer on a glassy carbon electrode. The remaining layers were coated with chitosan-MWCNTs, GOx, and the chitosan-PTFE film in sequence. The MWCNTs embedded in FAD were like "conductive wires" connecting FAD with electrode, reduced ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors and Actuators B: Chemical
سال: 2016
ISSN: 0925-4005
DOI: 10.1016/j.snb.2015.08.033