Integrated diamond sapphire laser
نویسندگان
چکیده
منابع مشابه
Integrated diamond Raman laser pumped in the near-visible.
Using a high-Q diamond microresonator (Q>300,000) interfaced with high-power-handling directly-written doped-glass waveguides, we demonstrate a Raman laser in an integrated platform pumped in the near-visible. Both TM-to-TE and TE-to-TE lasing is observed, with a Raman lasing threshold as low as 20 mW and Stokes power of over 1 mW at 120 mW pump power. Stokes emission is tuned over a 150 nm (60...
متن کاملFemtosecond Laser Ablation of Sapphire
INSTRUCTION Sapphire is widely used in the field of optical components and micromechanical devices owing to its useful mechanical, optical, and electrical properties. However, sapphire is mechanically and chemically difficult to machine because of its high hardness and chemical stability. The difficulty of machining sapphire has restricted the development of advanced device structures. As sapph...
متن کاملAn Investigation on Two Types of Crystalline Micro-diamond Film Coated Tools Lapping with Sapphire Wafer
Two types of micron-diamond films were prepared on YG6 substrate by hot filament chemical vapor deposition(HFCVD) method. Morphology and orientation of crystalline growth were evaluated by SEM and XRD. Diamond film coated tools and sapphire wafer’ surface before and after lapping experiment were contrasted. The results indicated that a significant change in Raman spectrum of two types of micro...
متن کاملMonolithic diamond Raman laser.
A monolithic diamond Raman laser is reported. It utilizes a 13-mm radius of curvature lens etched onto the diamond surface and dielectric mirror coatings to form a stable resonator. The performance is compared to that of a monolithic diamond Raman laser operating in a plane-plane cavity. On pumping with a compact Q-switched laser at 532 nm (16 μJ pulse energy; 1.5 ns pulse duration; 10 kHz repe...
متن کاملLaser Micro-Raman Spectroscopy of CVD Nanocrystalline Diamond Thin Film
Laser micro-Raman spectroscopy is an ideal tool for assessment and characterization of various types of carbon-based materials. Due to its special optical properties (CrN) coated stainless steel substrates. NCD films have been investigated by laser micro-Raman spectroscopy. The fingerprint of diamond based materials is in the spectral region of 1000-1600 cm-1 in the first order of Raman scatter...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2003
ISSN: 1094-4087
DOI: 10.1364/oe.11.002532