INTER-METALLIDE COATING STRUCTURE AFTER THERMO-CYCLING
نویسندگان
چکیده
منابع مشابه
Micro-tensile bond strength of adhesives bonded to Class-I cavity-bottom dentin after thermo-cycling.
UNLABELLED A widely used artificial aging methodology is thermo-cycling. The ISO TR 11450 standard (1994) recommends 500 cycles in water between 5 and 55 degrees C. Recent literature revealed that more cycles are needed to mimic long-term bonding effectiveness. Furthermore, the artificial aging effect induced by thermo-cycling is not clearly established. Two underlying mechanisms can be advance...
متن کاملLamins: 'structure goes cycling'.
Nuclear intermediate filaments formed by A- and B-type lamins are central components of the nucleoskeleton and are required for the architecture and integrity of the nucleus. There is growing evidence that lamins are also involved in regulatory pathways controlling cell proliferation and differentiation. Lamins affect the activity of several transcription factors, such as retinoblastoma protein...
متن کاملDiamond Coating in Accelerator Structure
The future accelerators with 1 GeV/m gradient will give rise to hundreds of degrees instantaneous temperature rise on the copper surface. Due to its extraordinary thermal and electric properties, diamond coating on the surface is suggested to remedy this problem. Multi-layer structure, with the promise of even more temperature reduction, is also discussed, and a proof of principle experiment is...
متن کاملThermo-sensitive imprinted polymer coating CdTe quantum dots for target protein specific recognition.
A thermo-sensitive imprinted polymer coating CdTe quantum dots was developed to prepare fluorescent thermo-sensitive protein-affinity materials, which exhibited high specific recognition ability towards target proteins.
متن کاملKinetic Study of Niobium Carbide Coating Formation on AISI L2 Steel using Thermo-Reactive Deposition Technique
In the present study, Thermo-Reactive Deposition method (TRD) in a molten bath was used to form niobium carbide coating on AISI L2 steel. The coating was formed in five different composition of borax (Na2B4O7), boric acid (B2O3), and ferro-niobium. For all of the five compositions of molten bath, niobium carbide coating treatment was carried out at 1173 K, 1273 K, and 1373 K for 2, 4 and 8 hour...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of Bryansk state technical university
سال: 2018
ISSN: 1999-8775
DOI: 10.30987/article_5bd17b46967cb0.41264280