Interface Phenomena between Prosthodontic Crown and Abutment Sprayed with Die Spacer
نویسندگان
چکیده
منابع مشابه
An esthetic comparison of a metal ceramic crown and cast metal abutment with an all-ceramic crown and zirconia abutment: a clinical report.
This clinical report compares the esthetic outcome of replacing the same left maxillary central incisor with 2 types of implant-supported restorations, a zirconia abutment with a Procera crown and a custom metal abutment with metal ceramic crown. There were only subtle differences noted and both restorations yielded a satisfactory result.
متن کاملNew abutment for a screw-retained, implant-supported crown.
The 1-piece, implant-supported abutment and crown, colloquially described as the UCLA abutment, commonly is used to fabricate single, screw-retained crowns. This abutment was designed to allow attachment of the crown directly to the implant and requires a waxing and casting procedure by a laboratory technician. A new prefabricated abutment has been developed that uses a similar approach but doe...
متن کاملBacterial Leakage Along the Implant-Abutment Interface
Titanium implants have been successfully and increasingly used for the substitution of dental elements in the treatment of total or partial edentulism, exhibiting success rates frequently above 90%, since the earliest reports on this technique in the 1960 decade (Lang et al., 2004; Pjetursson et al., 2007; Jung et al., 2008). When treatment failures are calculated based on patients who lost imp...
متن کاملImmediate provisionalization with a CAD/CAM interim abutment and crown: a guided soft tissue healing technique.
A technique is described in which a single interim abutment and crown were fabricated in advance and placed the day of dental implant surgery. The contours of the interim crown were identical to the contours of a tentatively designed definitive prosthesis and allowed the tissue to heal and obtain contours that accommodated the contours of the definitive prosthesis. After osseointegration was es...
متن کاملEffect of morphology and nonbounded interface on dielectric properties of plasma sprayed BaTiO3 Coating
In this research, BaTiO3 thick deposit has been successfully sprayed by air plasma spray. The microstructure and dielectric properties of thick films were investigated by secondary electron microscopy (SEM) and LCR meter respectively. XRD measurement was carried out on plasma sprayed BaTiO3. The results illustrate differences in the crystal structure between plasma sprayed coatings and feed sto...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean institute of surface engineering
سال: 2007
ISSN: 1225-8024
DOI: 10.5695/jkise.2007.40.4.197