Interfacial bonding mechanism and annealing effect on Cu-Al joint produced by solid-liquid compound casting
نویسندگان
چکیده
منابع مشابه
Optimization of Microstructure and Mechanical Properties of Al-A360 Produced by Semi-Solid Casting
Semi-Solid Casting (SSM) is a new process that could produce globular structures with mechanical properties. The cooling slope method (CLM) is a one of this process that was employed to produce the A360 feedstock. In this method, The dendritic primary phase in the conventionally cast A356 alloy has transformed into a non-dendritic one. In this paper, The molten alloy with the temperature (PT) o...
متن کاملEFFECT OF POST-DEFORMATION ANNEALING TREATMENT ON INTERFACE PROPERTIES AND SHEAR BOND STRENGTH OF Al-Cu BIMETALLIC RODS PRODUCED BY EQUAL CHANNEL ANGULAR PRESSING
Effects of annealing treatment after equal channel angular pressing (ECAP) on the interface properties and shear bond strength of Al/Cu bimetallic rods were investigated. For the as-deformed samples, the one with two passes of ECAP indicated higher shear bond strength. Formation of a layer of intermetallic compounds after annealing treatment is confirmed. In general, by increasing annealing tem...
متن کاملSolid-liquid interfacial premelting.
We report the observation of a premelting transition at chemically sharp solid-liquid interfaces using molecular-dynamics simulations. The transition is observed in the solid-Al-liquid-Pb system and involves the formation of a liquid interfacial film of Al with a width that grows logarithmically as the bulk melting temperature is approached from below, consistent with current theories of premel...
متن کاملStrength of joints produced by transient liquid phase bonding in the Cu–Sn system
The paper focuses on the strength and toughness of joints produced by transient liquid phase (TLP) bonding in the Cu–Sn system. It is motivated by potential applications of TLP bonding in attachment of high-temperature wide bandgap devices to ceramic substrates. Model test specimens suitable for mechanical testing are developed, utilizing substrates of oxide dispersion strengthened copper. Thre...
متن کاملAluminium Foam and Magnesium Compound Casting Produced by High-Pressure Die Casting
Nowadays, fuel consumption and carbon dioxide emissions are two of the main focal points in vehicle design, promoting the reduction in the weight of vehicles by using lighter materials. The aim of the work is to evaluate the influence of different aluminium foams and injection parameters in order to obtain compound castings with a compromise between the obtained properties and weight by high-pr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Processing Technology
سال: 2018
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2017.10.050