Inversion for Fire Heat-Release Rate Using Heat Flux Measurements
نویسندگان
چکیده
منابع مشابه
Spatially resolved heat release rate measurements in turbulent premixed flames
Heat release rate is a fundamental property of great importance for the theoretical and experimental elucidation of unsteady flame behaviors such as combustion noise, combustion instabilities, and pulsed combustion. Investigations of such thermoacoustic interactions require a reliable indicator of heat release rate capable of resolving spatial structures in turbulent flames. Traditionally, heat...
متن کاملEstimation of Heat Release in Fire Compartment
This paper presents the model to estimate heat release in fire compartment about four fuels, Douglas fir considering char formation and moisture content, methanol, methane and propane, with equivalence ratio Q on the basis of previous work and discusses about the difference of the combustion efficiency of them. As the result, calculated heat release of Douglas fir, methane and propane shows rel...
متن کاملHeat release of polymer composites in fire
The relationship between heat release rate and other fire reaction properties of fibre reinforced polymer composite materials is investigated. The heat release rate and fire reaction properties of thermoset matrix composites reinforced with combustible fibres (aramid, extended-chain polyethylene) or non-combustible fibres (glass, carbon) were determined over a range of heat flux levels using th...
متن کاملHeat Flux Determination from Ultrasonic Pulse Measurements
Ultrasonic time of flight measurements have been used to estimate the interior temperature of propulsion systems remotely. All that is needed is acoustic access to the boundary in question and a suitable model for the heat transfer along the path of the pulse train. The interior temperature is then deduced from a change in the time of flight and the temperature dependent velocity factor, which ...
متن کاملA simple Analytical model for solidification cooling rate based on the local heat flux density
A new simple analytical model for prediction of cooling rate in the solidification process based on the local heat flux density extracted during solidification is introduced. In the modeling procedure, a solidifying control volume is considered in the mushy zone in which a heat balance equation is used to derive the present model. As the local heat flux density is a measurable parameter, the pr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Heat Transfer
سال: 2020
ISSN: 0022-1481,1528-8943
DOI: 10.1115/1.4046264