INVESTIGATION OF BRAZING FILLER FOR BRAZING HIGH-TEMPERATURE NICKEL ALLOYS OF MARINE GAS TURBINES

Wettability of Brazing Filler Metals on Copper and Copper Alloys

The possibility of alloying can not be avoided at the interface between molten brazing filler metal and base metal in brazing, so the wettability of brazing filler metal can not be easily explained theoretically. We used the original apparatus for wettability test and investigated the relation between the wettability of brazing filler metals of Ag-P-Cu and Ag-Cu-Zn-Cd systems on copper and the ...

Nickel-chromium-based Amorphous Brazing Foils for Continuous Furnace Brazing of Stainless Steel

Development of Brazing Technology for Use in High- Temperature Gas Separation Equipment

The development of high-temperature electrochemical devices such as oxygen and hydrogen separators, fuel gas reformers, solid oxide fuel cells, and chemical sensors is part of a rapidly expanding segment of the solid state technology market. These devices employ an ionic conducting ceramic as the active membrane that establishes the electrochemical potential of the device, either under voltage ...

Soldering and brazing of copper and copper alloys

Investigation on effect of holding time in brazing of steel to cemented carbide using Cu-Ag alloy filler metal

Nowadays, cemented carbides-steels joints by brazing method are taken into consideration. One of the problems of these joints is the creation residual stresses that can reduce it with choose correct parameters of brazing. In this study, Silver base alloy filler containing copper, zinc and cadmium have been used in temperature 780°C and the effect of time parameter 5, 10 and 15 minutes on micros...