Investigation of Deformation Based Damage Limits of Reinforced Concrete Column

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Damage-Based Seismic Performance Evaluation of Reinforced Concrete Frames

A damage-based approach for the performance-based seismic assessment of reinforced concrete frame structures is proposed. A new methodology for structural damage assessment is developed that utilizes response information at the material level in each section fiber. The concept of the damage evolution is analyzed at the section level and the computed damage is calibrated with observed experiment...

متن کامل

Damage Assessment of Reinforced Concrete Buildings Considering Irregularities (RESEARCH NOTE)

Structural damage can be controlled in performance based seismic design (PBSD) according to the requirement under a certain hazard level. During strong ground motion (GM) such buildings suffer minor to major damages depending on the shaking level of GM. The available damage assessment methods are complex, tedious and time-consuming procedure. In the present study, a simplified empirical model h...

متن کامل

Experimental Investigation of Behavior of Glass Fiber Reinforced Concrete (GFRC)

The paper presents the results of casting and testing of 264 GFRC specimens. The glass fibers were 25 mm long, with the aspect ratio (L/D) ranging between 1250 and 3570. The parameters studied were the ratio (by weight) of fibers to cement, i.e. F/C=0%, 1.5%, 3%, and 4.5%, and the ratio of coarse to fine aggregates (gravel to sand), i.e. G/S=1.1, 0.7 and 0.2. In total, 12 mix designs were selec...

متن کامل

Experimental Investigation of Behavior of Glass Fiber Reinforced Concrete (GFRC)

The paper presents the results of casting and testing of 264 GFRC specimens. The glass fibers were 25 mm long, with the aspect ratio (L/D) ranging between 1250 and 3570. The parameters studied were the ratio (by weight) of fibers to cement, i.e. F/C=0%, 1.5%, 3%, and 4.5%, and the ratio of coarse to fine aggregates (gravel to sand), i.e. G/S=1.1, 0.7 and 0.2. In total, 12 mix designs were selec...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi

سال: 2019

ISSN: 1308-5514

DOI: 10.29137/umagd.519208