Investigation of Diameter of Riprap around the Bridge Abutment at 180-Degree River Bend

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

بررسی اندازه قطر سنگ چین در اطراف تکیه‌گاه پل در قوس 180 درجه رودخانه

River bend due to particular pattern, called 'Vortex Flow,' has greater erosion than straight path. Occurrence of scour around bridge abutment on curved paths is one of the main reasons for destruction of bridges. Riprap is one of the methods to control the scouring around the bridge abutment. The purpose of this study was to assess stability of the riprap around the bridge abutment at 180 degr...

متن کامل

The effect of the geometry of the scour around bridge abutments in the river bend

Every year a large number of bridges flooding in the river just when they most need them there destroy all born. Carried out. In this study, the four fulcrum forms a semi-circular, trapezoidal, rectangular edges rounded rectangle 90 degrees at 70 degrees in Sagittarius with four different discharges depth of constant scouring around the abutment in pure water were examined. For material of flum...

متن کامل

Experimental Study of the Effect of Base-level fall at the Beginning of the Bend on Reduction of Scour around a Rectangular Bridge Pier Located in the 180 Degree Sharp Bend

Base-level fall in river beds occurs due to varying natural or unnatural causes. Base-level fall causes the change in the behavior of flow at the location of drop in base-level. In such situations, most of scour occur at the foot of the slope, and slope wall retreats in the upstream direction. This phenomenon widens the wall of the river bank, thus leading to its destruction. The amount of bed ...

متن کامل

تعیین قطر سنگچین پایدار اطراف پایه پل استوانه‌ای در قوس رودخانه‌ها

Local scour around piers is the major cause of their foundation failure in the river bends that endangers the stability of the structure and its efficiency. Riprap is commonly placed around the bridges piers for local scour protection. The aim of this study was to present an equation for estimating stable riprap diameter around a cylindrical bridge pier in river bends. In this study, using an e...

متن کامل

بررسی اثر شکل هندسی تکیه‌گاه پل در پایداری سنگ‌چین در قوس رودخانه

Riprap is used to control scouring around the bridge abutment. In order to study the stability of riprap around two bridge abutments with two different shapes, experiments were conducted in a laboratory flume made of Plexiglass in 180 degree bend.  In this research, several experiments were done by placing the two bridge abutments made of Plexiglas in a series of riprap. Experiments included tw...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Water and Soil Science

سال: 2018

ISSN: 2476-3594,2476-5554

DOI: 10.29252/jstnar.21.4.229